Skip to main content

struct

Address​

Address as a set of individual components.

public init(
    drillDown: [AddressAdmDiv],
    components: [AddressComponent],
    buildingName: String?,
    postCode: String?,
    buildingCode: String?,
    fiasCode: String?,
    addressComment: String?
)
Parameters

drillDown

components

buildingName

postCode

buildingCode

fiasCode

addressComment

Properties

var drillDown​

Set of administrative division objects in which the object being described is located.

var components​

Complete address of an object may contain several separate address components.

var buildingName​

Name of the building.

var postCode​

ZIP code.

var buildingCode​

The unique ZIP code of the building.

var fiasCode​

FIAS code of the building.

var addressComment​

Address comment. Example: “office 301; floor 9”.

AddressAdmDiv​

Administrative unit object.

public init(
    type: String,
    name: String
)
Parameters

type

name

Properties

var type​

Type of administrative unit. One of the following:

var name​

AddressLocation​

Applies to components that are hard to describe with a specific address.

public init(
    comment: String
)
Parameters

comment

Properties

var comment​

Verbal description of the location of a building.

AddressNumber​

Some localities designate only the house number, without the street (e.g., Krasnoobsk).

public init(
    number: String,
    fiasCode: String?
)
Parameters

number

fiasCode

Properties

var number​

Building number, including fractions and letters. Possibly a proper name, if that is the custom.

var fiasCode​

FIAS street code.

AddressStreet​

Normal address, there is a street and house number.

public init(
    street: String,
    number: String,
    fiasCode: String?
)
Parameters

street

number

fiasCode

Properties

var street​

Street name.

var number​

Building number, including fractions, cases, and letters.

var fiasCode​

FIAS street code.

Anchor​

Image anchor point (0, 0) - upper left corner, (1, 1) - lower right corner.

public init(
    x: Float = 0.5,
    y: Float = 0.5
)
Parameters

x

Float

y

Float
Properties

var x​

Float

var y​

Float

ApartmentRange​

Range of apartments.

public init(
    start: String,
    end: String? = nil
)
Parameters

start

end

Properties

var start​

Range start/Stored value. Currently only numeric values are supported, apartments with suffixes are not yet available in the data.

var end​

End of range. If absent, the range consists of a single start value. Otherwise it is an arithmetic progression from start to end in steps of 1.

Attribute​

Additional attribute. Example: { tag: “hotel_room_internet”, name: “Free internet in the rooms” }.

public init(
    tag: String,
    value: String
)
Parameters

tag

value

Properties

var tag​

Tag.

var value​

Value.

AuthorInfo​

Information about the author of the event or photo.

public init(
    type: AuthorType,
    name: String
)
Parameters

type

name

Properties

var type​

Content author category.

var name​

String containing the name of the user who added the event or photo.

Bearing​

Angle between the direction to one object and another object or between the direction to the object and north. The angle is counted clockwise. The value range is [0°, 360°].

public init(
    value: Double = 0
)
Parameters

value

public init(floatLiteral value: Double)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Value to create.

Properties

var value​

BetterRouteInfo​

Information on available alternative route.

public init(
    trafficRoute: TrafficRoute,
    startPoint: RoutePoint
)
Parameters

trafficRoute

startPoint

Properties

var trafficRoute​

Alternative route.

var startPoint​

Point on the alternative route from which traffic starts if you switch to this route.

BicycleBriefRouteInfo​

Basic cycling route information.

public init(
    length: RouteDistance,
    landmark: String
)
Parameters

length

landmark

Properties

var length​

Route length.

var landmark​

Landmark.

BicycleInstructionCrossroad​

Description of maneuvers when passing through an intersection or crosswalk.

public init(
    landmark: BicycleInstructionCrossroadLandmark = BicycleInstructionCrossroadLandmark.`none`,
    maneuvers: [BicycleInstructionCrossroadManeuver]
)
Parameters

landmark

maneuvers

Properties

var landmark​

Landmark.

var maneuvers​

Chain of sequential maneuvers.

BicycleInstructionCrossroadManeuver​

public init(
    direction: BicycleInstructionCrossroadManeuverDirection = BicycleInstructionCrossroadManeuverDirection.straight,
    turnAngle: Int32 = 0
)
Parameters

direction

turnAngle

Int32
Properties

var direction​

Direction of travel.

var turnAngle​

Int32

Turning angle in degrees [-180, 180].

BicycleInstructionFinish​

End of the cycling part of the route.

public init()

BicycleInstructionStart​

The beginning of the cycling part of the route.

public init()

BicycleRouteSearchOptions​

Bicycle route search options.

public init(
    avoidCarRoads: Bool = false,
    avoidStairways: Bool = false,
    avoidUnderpassesAndOverpasses: Bool = false,
    excludedAreas: [ExcludedArea] = []
)
Parameters

avoidCarRoads

avoidStairways

avoidUnderpassesAndOverpasses

excludedAreas

Properties

var avoidCarRoads​

Avoid roads.

var avoidStairways​

Avoid stairs.

var avoidUnderpassesAndOverpasses​

Avoid underpasses and overpasses.

var excludedAreas​

Excluded areas (not more than 25).

BoolRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: Bool
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

Borders​

Describes a continuous set of sorted values.

public init(
    snapping: Double?,
    isLg: Bool,
    value: String,
    min: Double,
    max: Double,
    currentMin: Double? = nil,
    currentMax: Double? = nil
)
Parameters

snapping

isLg

value

min

max

currentMin

currentMax

Properties

var snapping​

Defines snapping to the value multiple of this number.

var isLg​

Indication of using the logarithmic scale.

var value​

Value by which filtering is done.

var min​

Lower bound of the values set.

var max​

Upper bound of the values set.

var currentMin​

Currently set minimum value.

var currentMax​

Currently set maximum value.

BriefRoadEvent​

public init(
    id: UInt64 = 0,
    eventType: RoadEventType = RoadEventType.other,
    lanes: LaneOptionSet
)
Parameters

id

eventType

lanes

Properties

var id​

var eventType​

var lanes​

BriefRouteInfo​

Basic route information.

public init(
    duration: TimeInterval,
    extraInfo: BriefExtraRouteInfo
)
Parameters

duration

TimeInterval

extraInfo

Properties

var duration​

Time of travel along the route.

var extraInfo​

Additional route information for a specific vehicle type.

BriefRouteInfoSearchPoints​

Points to query for basic route information search.

public init(
    startPoint: RouteSearchPoint,
    finishPoint: RouteSearchPoint
)
Parameters

startPoint

finishPoint

Properties

var startPoint​

Starting point of the route.

var finishPoint​

Finish point of the route.

BuildingId​

Building ID.

public init(
    value: UInt64 = 0
)
Parameters

value

Properties

var value​

BuildingInfo​

Information about building.

public init(
    buildingName: String? = nil,
    purposeName: String? = nil,
    purposeCode: PurposeCode? = nil,
    buildingLevels: BuildingLevels? = nil
)
Parameters

buildingName

purposeName

purposeCode

buildingLevels

Properties

var buildingName​

Name of the building.

var purposeName​

Description of the purpose of the building.

var purposeCode​

Code of the purpose of the building.

var buildingLevels​

Information about floor plans of the building.

BuildingLevels​

Information about the floor plans of the building.

public init(
    defaultLevelId: LevelId,
    levels: [LevelInfo]
)
Parameters

defaultLevelId

levels

Properties

var defaultLevelId​

Default floor plan identifier.

var levels​

All floor plans of the building.

CalloutMapPosition​

Route bubble position.

public init(
    mapId: MapId,
    calloutPosition: GeoPoint?,
    routePoint: RoutePoint?
)
Parameters

mapId

calloutPosition

routePoint

Properties

var mapId​

Identifier of the map for which the position is given.

var calloutPosition​

Position on the map.

var routePoint​

Lane bubble position on the route.

CameraBehaviour​

Camera tracking mode.

public init(
    position: FollowPosition?,
    tilt: FollowTilt = FollowTilt.off
)
Parameters

position

tilt

Properties

var position​

var tilt​

CameraBehaviourChange​

Changes tracking mode.

public init(
    newBehaviour: CameraBehaviour,
    changeReason: CameraBehaviourChangeReason = CameraBehaviourChangeReason.application
)
Parameters

newBehaviour

changeReason

Properties

var newBehaviour​

New tracking mode.

var changeReason​

Reason for changing tracking mode.

CameraPosition​

Camera position.

public init(
    point: GeoPoint,
    zoom: Zoom,
    tilt: Tilt = Tilt(value: 0),
    bearing: Bearing = Bearing(value: 0)
)
Parameters

point

zoom

tilt

bearing

Properties

var point​

Terrain point that is located at the camera position point (see ICamera::position_point()).

var zoom​

Zoom level. 0 is the entire world inscribed in a square of 256x256 logical pixels (see LogicalPixel).

var tilt​

Tilt angle of the gaze direction vertically.
0 is nadir (vertically downward), maximum value is 60 degrees.

var bearing​

Angle of rotation of the view direction horizontally relative to the north direction. Counted clockwise, in degrees.

CameraPositionChange​

Changing specific parameters of camera position.

public init(
    point: GeoPoint? = nil,
    zoom: Zoom? = nil,
    tilt: Tilt? = nil,
    bearing: Bearing? = nil
)
Parameters

point

zoom

tilt

bearing

Properties

var point​

var zoom​

var tilt​

var bearing​

CameraPositionPoint​

Relative screen position of the point to which the camera is linked.

public init(
    x: Float = 0.5,
    y: Float = 0.5
)
Parameters

x

Float

y

Float
Properties

var x​

Float

var y​

Float

CameraProgressInfo​

Information about the progress of the camera zone.

public init(
    camera: RouteCamera,
    position: RoutePoint,
    progress: Float = 0
)
Parameters

camera

position

progress

Float
Properties

var camera​

Camera for the area for which progress is being tracked.

var position​

Camera position on the route.

var progress​

Float

Progress of the camera area, [0, 1].

CameraPurposeOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let speedControl​

Recording of exceeding the speed limit.

static let averageSpeedControl​

Recording of exceeding the average speed on the section.

static let publicTransportLaneMovementControl​

Recording of movement on the dedicated lane for public transport.

static let roadMarkingsCrossingControl​

Recording of crossing the solid line of road markings, driving on the side of the road.

static let trafficLightsViolationControl​

Recording of passing at the forbidden signal of traffic lights.

static let stopLineCrossingControl​

Recording of driving over the stop line, driving without stopping the stop sign, driving to the intersection during a jam.

static let oncomingTrafficLaneMovementControl​

Recording driving in the oncoming lane.

static let pedestrianAdvantageViolationControl​

Recording failure to give priority to pedestrians.

static let laneDisciplineControl​

Recording of violation of lane rotation at the intersection.

static let noStoppingViolationControl​

Recording of violation of prohibition of stopping.

static let dummy​

Fake item.

static let truck​

Platon system camera, truck restriction control camera.

CameraRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: RouteCamera
)
Parameters

point

value

Properties

var point​

var value​

CameraZoomRestrictions​

Allowed range of zoom level variation.

public init(
    minZoom: Zoom = Zoom(value: 0),
    maxZoom: Zoom = Zoom(value: 20)
)
Parameters

minZoom

maxZoom

Properties

var minZoom​

Minimum zoom level must be less than the maximum.

var maxZoom​

Maximum zoom level is limited to a value of 20.

CarBriefRouteInfo​

Basic information about the automobile route.

public init(
    length: RouteDistance,
    landmark: String,
    trafficSpeed: CarBriefRouteInfoTrafficSpeed
)
Parameters

length

landmark

trafficSpeed

Properties

var length​

Route length.

var landmark​

Landmark.

var trafficSpeed​

Travel speed.

CarInstructionCrossroad​

Description of maneuvers at the intersection.

public init(
    direction: CarInstructionCrossroadDirection = CarInstructionCrossroadDirection.straight,
    turnAngle: Int32 = 0,
    landmark: CarInstructionCrossroadLandmark = CarInstructionCrossroadLandmark.`none`,
    exitName: String
)
Parameters

direction

turnAngle

Int32

landmark

exitName

Properties

var direction​

Direction of traffic at the intersection.

var turnAngle​

Int32

Turning angle in degrees [-180, 180].

var landmark​

Landmark.

var exitName​

Exit name.

CarInstructionFinish​

End of the automobile part of the route.

public init()

CarInstructionRoundabout​

Description of maneuvers at a traffic circle intersection.

public init(
    type: CarInstructionRoundaboutType = CarInstructionRoundaboutType.entry,
    turnAngle: Int32 = 0,
    exitNumber: UInt32 = 0,
    exitName: String
)
Parameters

type

turnAngle

Int32

exitNumber

exitName

Properties

var type​

Type of instruction.

var turnAngle​

Int32

Turning angle in degrees [-180, 180].

var exitNumber​

Exit number - [1, inf] or 0 if the exit number is unknown.

var exitName​

Exit name.

CarInstructionStart​

Start of the automobile part of the route.

public init()

CarInstructionUTurn​

U-turn on the road (not at an intersection).
U-turn at an intersection is described by the Crossroad instruction.

public init(
    exitName: String
)
Parameters

exitName

Properties

var exitName​

Exit name.

CarRouteSearchOptions​

Route search parameters in a passenger car.

public init(
    avoidTollRoads: Bool = false,
    avoidUnpavedRoads: Bool = false,
    avoidFerries: Bool = false,
    avoidLockedRoads: Bool = true,
    routeSearchType: RouteSearchType = RouteSearchType.jam,
    excludedAreas: [ExcludedArea] = []
)
Parameters

avoidTollRoads

avoidUnpavedRoads

avoidFerries

avoidLockedRoads

routeSearchType

excludedAreas

Properties

var avoidTollRoads​

Avoid toll roads.

var avoidUnpavedRoads​

Avoid unpaved roads.

var avoidFerries​

Avoid ferry crossings.

var avoidLockedRoads​

Avoid closed roads. If true, the route search will not take into account road closures. If false is set, the route can be created through roadblocks if you cannot build a route without passing through roadblocks.

var routeSearchType​

Route search type.

var excludedAreas​

Excluded areas (not more than 25).

CircleOptions​

Parameters for creating a geometric map object of the Circle type.

public init(
    position: GeoPoint,
    radius: Meter,
    color: Color = Color(),
    strokeWidth: LogicalPixel = LogicalPixel(value: 0),
    strokeColor: Color = Color(),
    dashedStrokeOptions: DashedStrokeCircleOptions? = nil,
    visible: Bool = true,
    userData: Any = (),
    zIndex: ZIndex = ZIndex(value: 0),
    levelId: LevelId? = nil
)
Parameters

position

radius

color

strokeWidth

strokeColor

dashedStrokeOptions

visible

zIndex

levelId

Properties

var position​

Geographic position.

var radius​

Radius in meters.

var color​

Fill color.

var strokeWidth​

Circle border line width.

var strokeColor​

Color of the circle boundary line.

var dashedStrokeOptions​

var visible​

Visibility flag.

var userData​

Any

User data. (not used inside SDK, only for API users).

var zIndex​

Object drawing level.

var levelId​

Binding to the floor plan of the building.

ClusterOptions​

Cluster marker parameters.

public init(
    attributes: [String: AttributeValue],
    userData: Any = ()
)
Parameters

attributes

String[ : ]
Properties

var attributes​

[String : AttributeValue]

Cluster attributes.

var userData​

Any

User data returned to IClusterObject.

Color​

Color.

public init(
    argb: UInt32 = 4278190080
)
Parameters

argb

init(
	red: CGFloat,
	green: CGFloat,
	blue: CGFloat,
	alpha: CGFloat
)
Parameters

red

green

blue

alpha

init?(_ color: UIColor)
Parameters

color

Properties

var argb​

CompassView​

UI control of the compass in SwiftUI.

Properties

var body​

some View

Contents and behavior of the control.

ContactInfo​

Way to contact the organization.

public init(
    type: String,
    displayText: String,
    value: String,
    comment: String?
)
Parameters

type

displayText

value

comment

Properties

var type​

Type of contact. One of the following:

var displayText​

Value of the contact to display on the screen.

var value​

Technical value of the contact. Depending on the type of contact, it has the following semantics:

var comment​

Clarifying information about the contact.

CurrentLocationView​

Control of the current location in SwiftUI.

Properties

var body​

some View

Contents and behavior of the control.

DashboardButtonSettings​

Settings for a button in the bottom panel of the NavigationView.

Properties

var enabled​

Button visibility.

var icon​

Icon. By default, the icon for adding road events is used.

var callback​

(() -> ())?

Callback function that is called when a button is pressed. By default, the function for creating road events is set.

static var `default`​

Default settings for a button in the bottom panel.

DashedPolylineOptions​

Parameters of the dotted polyline.

public init(
    dashLength: LogicalPixel = LogicalPixel(value: 5),
    dashSpaceLength: LogicalPixel = LogicalPixel(value: 2)
)
Parameters

dashLength

dashSpaceLength

Properties

var dashLength​

Dotted line length.

var dashSpaceLength​

Interdot length.

DashedStrokeCircleOptions​

public init(
    dashLength: LogicalPixel = LogicalPixel(value: 5),
    dashSpaceLength: LogicalPixel = LogicalPixel(value: 2)
)
Parameters

dashLength

dashSpaceLength

Properties

var dashLength​

Dash length.

var dashSpaceLength​

Length of the space between dashes.

DayTime​

Time moment within a day.

public init(
    hours: UInt8,
    minutes: UInt8
)
Parameters

hours

minutes

public static func < (lhs: DayTime, rhs: DayTime) -> Bool

Returns a Boolean value indicating whether the value of the first argument is less than that of the second argument.

Properties

var hours​

Hours, 0-23.

var minutes​

Minutes, 0-59.

DefaultRasterUrlTemplate​

public init(
    urlTemplate: String
)
Parameters

urlTemplate

Properties

var urlTemplate​

DeviceDensity​

Multiplier that is calculated as the ratio of DPI to the base DPI of the device.
Must be positive.

public init(
    value: Float = 0
)
Parameters

value

Float
Properties

var value​

Float

DevicePpi​

Resolution of the device display, in pixels per inch.
Must be positive.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

The value to create.

Properties

var value​

Float

static let autodetected​

PPI of the head unit screen. For example, for a smartphone connected to CarPlay, this is the PPI of the smartphone screen. The value is nil if the current device has an unknown PPI (unsupported device, e.g. from future). In such cases, you need to set the PPI yourself using the entry in Map.devicePpi.

static let defaultForFailedAutodetection​

This PPI is used by default in cases where it was not possible to automatically determine from the device model. See `.autodetected'.

DgisObjectId​

public init(
    objectId: UInt64 = 0,
    entranceId: UInt64 = 0
)
Parameters

objectId

entranceId

Properties

var objectId​

Stable numeric object identifier.
Zero identifier does not correspond to any object.

var entranceId​

Stable numeric identifier of the entrance for object_id.
Zero identifier means that the entrance is not set.

DirectoryFilter​

Filters for the directory.

public init(
    workTime: WorkTimeFilter?,
    dynamic: [DynamicFilter]
)
Parameters

workTime

dynamic

Properties

var workTime​

Filter by operating time.

var dynamic​

Dynamic filters.

DoubleRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: Double
)
Parameters

point

value

Properties

var point​

var value​

DynamicRouteInfo​

public init(
    roadEvents: RoadEventRouteAttribute,
    traffic: Traffic
)
Parameters

roadEvents

traffic

Properties

var roadEvents​

var traffic​

Elevation​

Non-negative elevation of the point above the surface, in meters.

public init(
    value: Float = 0
)
Parameters

value

Float
init(_ distance: CLLocationDistance)
Parameters

distance

public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

EntranceGeometry​

Geometries for displaying the entrance on the map.

public init(
    entrancePoints: [GeoPoint],
    entrancePolylines: [[GeoPoint]]
)
Parameters

entrancePoints

entrancePolylines

Properties

var entrancePoints​

Entrance location.

var entrancePolylines​

Geometries for arrows pointing to the entrance.

EntranceInfo​

Information about the entrance to the building.

public init(
    id: DgisObjectId,
    buildingNumber: String?,
    porchName: String?,
    porchNumber: String?,
    apartmentRanges: [ApartmentRange],
    geometry: EntranceGeometry?
)
Parameters

id

buildingNumber

porchName

porchNumber

apartmentRanges

geometry

Properties

var id​

Input object ID.

var buildingNumber​

Number of the house to which the entrance belongs.

var porchName​

Non-empty entrance name. Filled in for entrances only. Can take values of the entrance name (e.g. "Entrance 1 ") or building number if the entrance has its own address.

var porchNumber​

Non-empty entrance number. Filled in for entrances only. Can take values of entrance number (e.g. "1 ") or building number if the entrance has its own address.

var apartmentRanges​

Apartment numbers pertaining to the entryway.

var geometry​

Geometries for displaying the entrance on the map.

ExcludedArea​

Excluded area to be avoided when building a route.

public init(
    type: ExcludedAreaType = ExcludedAreaType.point,
    severity: ExcludedAreaSeverity = ExcludedAreaSeverity.soft,
    extent: RouteDistance,
    points: [GeoPoint]
)
Parameters

type

severity

extent

points

Properties

var type​

Type of the excluded area.

var severity​

Priority of area exclusion.

var extent​

Size of the excluded area (not more than 25 km).

var points​

Coordinates of the points of the excluded area (not more than 500).

FlagFilter​

Flag filter.

public init(
    tagName: String,
    displayName: String,
    flagValue: Bool?
)
Parameters

tagName

displayName

flagValue

Properties

var tagName​

Filter tag.

var displayName​

Name of the filter to display.
Depends on the output language. Not all names can be translated.

var flagValue​

Flag value.

FloatRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: Float
)
Parameters

point

length

value

Float
Properties

var point​

var length​

var value​

Float

FloorInfo​

Information about the floor plan for the marker - element of the search output.

public init(
    levelId: LevelId,
    buildingId: BuildingId
)
Parameters

levelId

buildingId

Properties

var levelId​

Floor plan identifier.

var buildingId​

Building ID.

FollowPosition​

Tracking settings for direction, tilt, and zoom level.

public init(
    bearing: FollowBearing = FollowBearing.off,
    styleZoom: FollowStyleZoom = FollowStyleZoom.off
)
Parameters

bearing

styleZoom

Properties

var bearing​

var styleZoom​

FollowValueOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let coordinates​

static let bearing​

static let tilt​

static let styleZoom​

FormattedAddress​

A human-readable representation of the address.

public init(
    drilldownAddress: String?,
    streetAddress: String?,
    addressComment: String?,
    postCode: String?
)
Parameters

drilldownAddress

streetAddress

addressComment

postCode

Properties

var drilldownAddress​

Address from a drill-down. Example: “Novosibirsk, Kirovsky district”.

var streetAddress​

Address inside a settlement. Example: “Nikolaeva str., 11”.

var addressComment​

Address comment. Example: “office 301; floor 9”.

var postCode​

Postal code of the object with a building code, if any. Example: “630088”, “630007/XBVJF8”.

GeoPoint​

Point in a spherical coordinate system that, together with a geodetic coordinate system (e.g., WGS84), points to a point on the Earth's surface. This structure is not bound to a specific geodetic coordinate system. But this module contains free functions that operate with this structure already in a specific coordinate system (see the documentation to the functions).

public init(
    latitude: Latitude,
    longitude: Longitude
)
Parameters

latitude

longitude

init(latitude: CLLocationDegrees, longitude: CLLocationDegrees)
Parameters

latitude

longitude

init(coordinate: CLLocationCoordinate2D)
Parameters

coordinate

Methods
func bearing(point: GeoPoint) -> Bearing

Calculates the bearing (the angle between the geographic north direction and the direction of movement, counted clockwise) between two points.

Parameters

point

Returns
Bearing
func distance(point: GeoPoint) -> Meter

Calculates the minimum distance (along a great circle) between two points.

Parameters

point

Returns
Meter
func move(bearing: Bearing, meter: Meter) -> GeoPoint

Calculates the point obtained by moving the source point in the specified direction by the specified distance.

Parameters

bearing

meter

Returns
GeoPoint
Properties

var latitude​

var longitude​

var isValid​

GeoPointRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: GeoPoint
)
Parameters

point

value

Properties

var point​

var value​

GeoPointWithElevation​

Point in a geographic coordinate system (latitude, longitude, elevation).
Elevation is defined in meters above the surface, not above the sea level.

public init(
    latitude: Latitude,
    longitude: Longitude,
    elevation: Elevation = Elevation(value: 0)
)
Parameters

latitude

longitude

elevation

init(
	point: GeoPoint,
	elevation: Elevation = 0.0
)
Parameters

point

elevation

init(
	latitude: CLLocationDegrees,
	longitude: CLLocationDegrees,
	elevation: CLLocationDistance
)
Parameters

latitude

longitude

elevation

init(
	coordinate: CLLocationCoordinate2D,
	elevation: CLLocationDistance
)
Parameters

coordinate

elevation

Methods
func bearing(point: GeoPoint) -> Bearing

Calculates the bearing (the angle between the geographic north direction and the direction of movement, counted clockwise) for the projection of a point on the map and for a given point.

Parameters

point

Returns
Bearing
func distance(point: GeoPoint) -> Meter

Calculates the minimum distance (along a great circle) between two points.

Parameters

point

Returns
Meter
func move(bearing: Bearing, meter: Meter) -> GeoPointWithElevation

Calculates the point obtained by moving the source point in the specified direction by the specified distance.

Parameters

bearing

meter

Returns
GeoPointWithElevation
Properties

var latitude​

var longitude​

var elevation​

var point​

GeoRect​

Rectangular area in a spherical coordinate system (e.g. WGS84). This structure is not tied to a specific geodetic coordinate system.

public init(
    southWestPoint: GeoPoint,
    northEastPoint: GeoPoint
)
Parameters

southWestPoint

northEastPoint

Methods
func contains(
    rect2: GeoRect
) -> Bool
Parameters

rect2

Returns
Bool
func contains(
    point: GeoPoint
) -> Bool

Whether the rectangle contains the point. Points on the border are also considered to belong to the rectangle.

Parameters

point

Returns
Bool
func expand(
    rect2: GeoRect
) -> GeoRect
Parameters

rect2

Returns
GeoRect
func expand(
    point: GeoPoint
) -> GeoRect

Expands a rectangle. Return a minimum-sized rectangle containing the original rectangle and a point.

Parameters

point

Returns
GeoRect
func intersects(
    rect2: GeoRect
) -> Bool

Whether the rectangles intersect, i.e. have common points. The rectangles with common points located only on the boundary are also considered intersecting.

Parameters

rect2

Returns
Bool
Properties

var southWestPoint​

Southwest point, bottom left border of rectangle.

var northEastPoint​

Northeast point, top right of rectangle.

var isValid​

Checks rectangle for correctness.

var isDegenerate​

Checks the rectangle for degeneracy. If the points in the rectangle are equal, the rectangle is degenerate to a point. A degenerate rectangle is a correct rectangle. An incorrect rectangle is not degenerate.

GradientPolylineOptions​

Parameters of the gradient polyline.

public init(
    borderWidth: LogicalPixel = LogicalPixel(value: 0),
    secondBorderWidth: LogicalPixel = LogicalPixel(value: 0),
    gradientLength: LogicalPixel = LogicalPixel(value: 1),
    borderColor: Color = Color(),
    secondBorderColor: Color = Color(),
    colors: [Color],
    colorIndices: Data
)
Parameters

borderWidth

secondBorderWidth

gradientLength

borderColor

secondBorderColor

colors

colorIndices

Data
Properties

var borderWidth​

Line border width.

var secondBorderWidth​

Width of the second line border.

var gradientLength​

Gradient line length.

var borderColor​

Outline color.

var secondBorderColor​

Color of the second outline.

var colors​

Gradient polyline color palette.

var colorIndices​

Data

Gradient polyline color indexes. The number of indexes must be 1 less than the number of polyline points.

HttpOptions​

HTTP client options.

public init(
    timeout: TimeInterval = 15,
    useCache: Bool = true,
    cacheStoragePath: String? = nil,
    cacheMaxSize: UInt64? = nil
)
Parameters

timeout

TimeInterval

useCache

cacheStoragePath

cacheMaxSize

Properties

var timeout​

Timeout for HTTP requests.

var useCache​

Use the HTTP cache.

var cacheStoragePath​

Path to the root-level directory for the primary HTTP cache file storage. File storage will be located in the http_cache subdirectory of this directory. If the path is not specified, the default directory is used.

var cacheMaxSize​

Maximum size of the HTTP cache in bytes. If not specified, the default maximum HTTP cache size is 300 Mb.

ImageData​

Image data: size, format, and binary data.

public init(
    size: ScreenSize,
    format: ImageFormat,
    data: Data
)
Parameters

size

format

data

Data
Properties

var size​

var format​

var data​

Data

IndoorControlOptions​

Settings for the floor control element in the building.

public init(visibilityBehavior: VisibilityBehavior)
Parameters

visibilityBehavior

VisibilityBehavior
init(
	visibilityBehavior: VisibilityBehavior,
	markingByRoute: MarkingByRoute
)
Parameters

visibilityBehavior

VisibilityBehavior

markingByRoute

MarkingByRoute
Properties

var visibilityBehavior​

IndoorControlOptions.VisibilityBehavior

static let `default`​

Default settings. Automatic visibility control.

IndoorView​

Ui control of floor switching in SwiftUI.

Properties

var body​

some View

Contents and behavior of the control.

InstructionRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: RouteInstruction
)
Parameters

point

value

Properties

var point​

var value​

IntRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: Int32
)
Parameters

point

value

Int32
Properties

var point​

var value​

Int32

IsOpenNow​

Open now.

public init()

KeyFromAsset​

Key from an asset. For Android - assets directory. For iOS - Bundle.main directory.

public init(
    path: String
)
Parameters

path

Properties

var path​

Path relative to the asset root directory.

KeyFromFile​

Key from a file.

public init(
    path: String
)
Parameters

path

Properties

var path​

File path.

KeyFromString​

Key from a string.

public init(
    contents: String
)
Parameters

contents

Properties

var contents​

Contents.

LaneOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let left​

Left lane.

static let center​

Middle lane.

static let right​

Right lane.

LanesCalloutMapPosition​

Position of the lane bubble for the route.

public init(
    mapId: MapId,
    routePoint: RoutePoint,
    geoPoint: GeoPoint
)
Parameters

mapId

routePoint

geoPoint

Properties

var mapId​

Identifier of the map for which the position is given.

var routePoint​

The lane callout position on the route.

var geoPoint​

Position of the lane bubble on the map.

LaneSignRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RouteLaneSign
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

Latitude​

Geographic latitude.

public init(
    value: Double = 0
)
Parameters

value

public init(floatLiteral value: Double)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Value to create.

Properties

var value​

LevelId​

Floor plan identifier.

public init(
    value: UInt64 = 0
)
Parameters

value

Properties

var value​

LevelInfo​

Building floor information.

public init(
    id: LevelId,
    name: String
)
Parameters

id

name

Properties

var id​

Floor plan identifier.

var name​

Floor name.

Locale​

Locale identifier in the format [language designer]-[region designer]. Where language designer is the language code described in ISO 639-1, region designer is the country code described in ISO 3166-1.

public init(
    language: String,
    region: String
)
Parameters

language

region

Methods
static func makeLocale(
    localeStr: String
) -> Locale?

Creates a locale from a string representation in the LanguageTag or POSIX format.

Parameters

localeStr

Returns
Locale?
func toLocalePosix() -> String
Returns
String
Properties

var language​

Language code the follows the ISO 639-1 standard.

var region​

Country code that follows the ISO 3166-1 standard.

Location​

Geoposition.

public init(
    coordinates: LocationCoordinates,
    altitude: LocationFuzzyDouble?,
    course: LocationCourse?,
    groundSpeed: LocationFuzzyDouble?,
    source: String,
    timestamp: TimeInterval
)
Parameters

coordinates

altitude

course

groundSpeed

source

timestamp

TimeInterval
Properties

var coordinates​

coordinates::value - geoposition coodinates. coordinates::accuracy - horizontal accuracy of geopositioning coordinates (DRMS), m. https://en.wikipedia.org/wiki/Circular_error_probable Value range: >= 0.

var altitude​

altitude::value - altitude above the WGS84 reference ellipsoid, m. altitude::accuracy - standard deviation of the altitude measurement error, m. nil means that the platform does not provide this field. https://en.wikipedia.org/wiki/Standard_deviation Value range: (nil, > 0).

var course​

course::value - bearing (direction of travel along the Earth's surface. The angle is measured relative to geographic north). course::accuracy - standard deviation of the error of the bearing measurement. nil means that the platform does not provide this field. https://en.wikipedia.org/wiki/Standard_deviation Value range: (nil, > 0).

var groundSpeed​

ground_speed - speed along the Earth surface, m/s. Value range: >= 0. ground_speed::accuracy - mean square deviation of the speed measurement error, m/s. nil means that the platform does not provide this field. https://en.wikipedia.org/wiki/Rayleigh_distribution Value range: (nil, > 0).

var source​

Name of the geoposition source.
The timestamps between different geoposition sources are not synchronized, so you cannot compare the timestamps of geopositions that are derived from different sources.

var timestamp​

Time point at which the geoposition was determined. This point is not attached to any specific date and is used solely to calculate the time between two geopositioning measurements obtained from one geopositioning source in one session. This field should increase monotonically (even when the system is in sleep mode).

LocationCoordinates​

public init(
    value: GeoPoint,
    accuracy: Double
)
Parameters

value

accuracy

Properties

var value​

var accuracy​

LocationCourse​

public init(
    value: Bearing,
    accuracy: Bearing?
)
Parameters

value

accuracy

Properties

var value​

var accuracy​

LocationFuzzyDouble​

public init(
    value: Double,
    accuracy: Double?
)
Parameters

value

accuracy

Properties

var value​

var accuracy​

LogicalPixel​

Pixel the size of which is independent of screen density.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

LogMessage​

Message being logged.

public init(
    level: LogLevel,
    text: String,
    file: String,
    line: UInt32
)
Parameters

level

text

file

line

Properties

var level​

Logging level.

var text​

Message content.

var file​

Path to the file (full or relative) from which the entry was made.

var line​

Line number in which the message was recorded.

LogOptions​

SDK logging settings.

public init(
    systemLevel: LogLevel = LogLevel.warning,
    customLevel: LogLevel = LogLevel.warning,
    customSink: LogSink? = nil
)
Parameters

systemLevel

customLevel

customSink

Properties

var systemLevel​

Level of logging to the system log.

var customLevel​

Level of logging to the user log sink.

var customSink​

Custom logging receiver.

static let `default`​

Default settings. Warnings and more critical events are logged.

Longitude​

Geographic longitude.

public init(
    value: Double = 0
)
Parameters

value

public init(floatLiteral value: Double)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Value to create.

Properties

var value​

MapDirection​

Angle of the object relative to the north direction, in degrees, counted clockwise.

public init(
    value: Double = 0
)
Parameters

value

Properties

var value​

MapGestureViewFactory​

Default gesture processing factory.

Implements: IMapGestureViewFactory
public init(options: MapGestureViewOptions = .default)
Parameters

options

Methods
public func makeGestureView(
	map: Map,
	eventProcessor: IMapEventProcessor,
	coordinateSpace: IMapCoordinateSpace
) -> UIView & IMapGestureView

Creates a gesture handling layer.

Parameters

map

eventProcessor

coordinateSpace

Returns
UIView &

MapGestureViewOptions​

Default gesture layer settings.

public init(
	doubleTapScalingCenter: ScalingCenter,
	twoFingerTapScalingCenter: ScalingCenter,
	pinchScalingCenter: ScalingCenter
)
Parameters

doubleTapScalingCenter

ScalingCenter

twoFingerTapScalingCenter

ScalingCenter

pinchScalingCenter

ScalingCenter
Properties

var doubleTapScalingCenter​

MapGestureViewOptions.ScalingCenter

var twoFingerTapScalingCenter​

MapGestureViewOptions.ScalingCenter

var pinchScalingCenter​

MapGestureViewOptions.ScalingCenter

static let `default`​

Default settings. For double tap and two-finger tap gestures, zooming is relative to the location of the gesture.

MapId​

Identifier of the map instance, unique within the process.

public init(
    value: Int32 = 0
)
Parameters

value

Int32
Properties

var value​

Int32

MapOptions​

Initial map properties that can be set during its initialization. A property set to nil will not be applied, so the default value will be used.

Properties

var devicePPI​

Number of physical screen points in a line 2.54 cm long.

var deviceDensity​

Multiplier that is calculated as the ratio of devicePPI to the device's base DPI. The multiplier value corresponds to the nativeScale of the target screen.

var position​

Camera location relative to the map.

var positionPoint​

Relative location of the map location point in the camera view space.

var zoomRestrictions​

Boundaries of the map zoom.

var sources​

Map data sources.

var sourceDescriptors​

Set<MapOptions.SourceDescriptor>?

Simplified way to specify map data sources.

var styleFuture​

Future<Style>?

Initial map style with delayed loading. The style can be loaded using an IStyleFactory instance, see. Container.styleFactory'. Use Future.makeReadyValue(style)` if the style is already loaded.

var gestureViewFactory​

Gesture processing layer factory. If nil, gestures are not processed until the IMapView.gestureView property is set.

var graphicsPreset​

Selects a graphic preset.

var appearance​

Selection of a theme within the selected map style, taking into account the environment.

var maxFps​

Maximum allowable map refresh frequency.

var powerSavingMaxFps​

Maximum allowable map refresh frequency in energy saving mode.

var backgroundColor​

Backgroud color for loading styles.

static var `default`​

Initial settings set when creating map objects. The DPI is determined based on the main device screen (see DevicePpi.autodetected). If autodetected fails, DevicePpi.defaultForFailedAutodetection is used.

MapViewOverlay​

Protocol of the SwiftUI map layer.

Methods
func mapViewOverlayGestureView(_ view: (UIView & IMapGestureView)?) -> MapViewOverlay

Additional layer placed above the whole map surface. Used for intercepting gestures. If this layer is replaced with another one, you must also implement sending the map gestures via IMapEventProcessor. If the nil value is set, the built-in gesture handling is stopped.

Returns
MapViewOverlay
func mapViewOverlayAppearance(_ value: MapAppearance) -> MapViewOverlay

Sets an active theme set of the current style and enables automatic theme switching depending on the environment. If .automatic is selected, the map switches to the selected theme depending on the current look (light or dark).

Parameters

value

Returns
MapViewOverlay
func mapViewOverlayShowsAPIVersion(_ value: Bool) -> MapViewOverlay

Whether to show the API version in the copyright. Default value is false.

Parameters

value

Returns
MapViewOverlay
func mapViewOverlayCopyrightAlignment(_ alignment: CopyrightAlignment) -> MapViewOverlay

Copyright location.

Parameters

alignment

Returns
MapViewOverlay
func mapViewOverlayCopyrightInsets(_ insets: EdgeInsets) -> MapViewOverlay

Margin between the copyright and map borders. Default value is .zero. During positioning, safeAreaInsets of the map view are considered. Margin values cannot be negative.

Parameters

insets

EdgeInsets
Returns
MapViewOverlay
func mapViewOverlayUrlOpener(_ url: ((URL) -> Void)?) -> MapViewOverlay

Custom handler of opening the URL when a user taps the copyright.
Enables redefining the default behavior when following the link is done without user confirmation.

Returns
MapViewOverlay
func mapViewOverlayObjectTappedCallback(callback: MapObjectTappedCallback) -> MapViewOverlay

Adds a callback function that is called after a click on the map.

Parameters

callback

Returns
MapViewOverlay
func mapViewOverlayObjectLongPressCallback(callback: MapObjectTappedCallback) -> MapViewOverlay

Adds a callback function that is called after a long click on the map.

Parameters

callback

Returns
MapViewOverlay
func mapViewOverlayRemoveObjectTappedCallback(callback: MapObjectTappedCallback) -> MapViewOverlay

Removes a callback function that is called after a click on the map.

Parameters

callback

Returns
MapViewOverlay
func mapViewOverlayRemoveLongPressCallback(callback: MapObjectTappedCallback) -> MapViewOverlay

Removes a callback function that is called after a long click on the map.

Parameters

callback

Returns
MapViewOverlay
Properties

var body​

some View

Contents and behavior of the control.

MarkedUpText​

Span text.

public init(
    text: String,
    matchedParts: [MarkedUpTextSpan]
)
Parameters

text

matchedParts

Properties

var text​

Text.

var matchedParts​

Set of non-overlapping Span, in order, in a text string describing parts that match the user's query.

MarkedUpTextSpan​

Describes a subset of bytes of the string text.

public init(
    offset: UInt64,
    length: UInt64
)
Parameters

offset

length

Properties

var offset​

var length​

MarkerOptions​

Marker settings.

public init(
    position: GeoPointWithElevation,
    icon: Image?,
    iconMapDirection: MapDirection? = nil,
    anchor: Anchor = Anchor(x: 0.5, y: 0.5),
    text: String? = nil,
    textStyle: TextStyle? = nil,
    iconOpacity: Opacity = Opacity(value: 1),
    visible: Bool = true,
    draggable: Bool = false,
    iconWidth: LogicalPixel = LogicalPixel(value: 0),
    userData: Any = (),
    zIndex: ZIndex = ZIndex(value: 0),
    animatedAppearance: Bool = true,
    levelId: LevelId? = nil,
    iconAnimationMode: AnimationMode = AnimationMode.normal
)
Parameters

position

icon

iconMapDirection

anchor

text

textStyle

iconOpacity

visible

draggable

iconWidth

zIndex

animatedAppearance

levelId

iconAnimationMode

Properties

var position​

var icon​

var iconMapDirection​

var anchor​

var text​

var textStyle​

var iconOpacity​

var visible​

var draggable​

var iconWidth​

Target width used for scaling.

var userData​

Any

var zIndex​

Object drawing level.

var animatedAppearance​

Whether to animate the appearance.

var levelId​

Binding to the floor plan of the building.

var iconAnimationMode​

Animation mode.

MeasurementFormatterOutput​

Result of the formatting of the measurement.

public init(formattedMeasurement: String, unit: String)
Parameters

formattedMeasurement

unit

Properties

let formattedMeasurement​

Localized string representation of the measurement. For example: “40 km/h”.

let unit​

Localized string representation of a unit of measurement. For example: “km/h”.

Meter​

Length/distance in meters.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

MillisecondsRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: TimeInterval
)
Parameters

point

value

TimeInterval
Properties

var point​

var value​

MTLDeviceError​

Implements: ISDKError
public init(description: String)
Parameters

description

Properties

let description​

Textual representation of this instance.

var debugDescription​

Textual representation of this instance, suitable for debugging.

MyLocationControllerSettings​

Settings of the controller of a geolocation marker moving.

public init(
    bearingSource: BearingSource? = BearingSource.auto,
    animationDuration: TimeInterval = 1,
    coordinatesThreshold: Meter = Meter(value: 0.10000000149011612),
    bearingThreshold: Bearing = Bearing(value: 1)
)
Parameters

bearingSource

animationDuration

TimeInterval

coordinatesThreshold

bearingThreshold

Properties

var bearingSource​

Bearing source. If missing, a marker without bearing is displayed.

var animationDuration​

Non-negative duration of the real direction change.

var coordinatesThreshold​

Non-negative threshold value of the considered change of the real position and its precision.

var bearingThreshold​

Non-negative threshold value of the considered change of the real bering.

Navigator interface settings.

public init(
	mapControlsBehaviour: NavigationViewMapControlsBehaviour = .visibleWhenNavigationActive,
	distanceFormattingStrategy: DistanceFormattingStrategy = .default,
	durationFormattingStrategy: DurationFormattingStrategy = .default,
	durationValueFormattingStrategy: DurationValueFormattingStrategy = .default,
	timeFormattingStrategy: TimeFormattingStrategy = .default,
	speedFormattingStrategy: SpeedFormattingStrategy = .default,
	theme: NavigationViewTheme = .default,
	roadEventCardViewOptions: RoadEventCardViewOptions = .default,
	roadEventCreationEnabled: Bool = true,
	dashboardButtonSettings: DashboardButtonSettings = .default
)

Settings constructor.

Parameters

mapControlsBehaviour

Behavior of the camera controllers in navigation mode.

distanceFormattingStrategy

Way of formatting distances.

durationFormattingStrategy

Way to format the time interval.

durationValueFormattingStrategy

Formats the time interval value.

timeFormattingStrategy

Formats date/time.

speedFormattingStrategy

Formats speed.

theme

Navigator theme.

roadEventCardViewOptions

Traffic event card settings.

roadEventCreationEnabled

Whether a traffic event creation controller is needed.

dashboardButtonSettings

Settings for a button in the bottom panel of the NavigationView.

Properties

static var `default`​

Navigator default interface settings.

Navigator theme.

public init(colors: Colors)
Parameters

colors

Colors
public init(
	colors: Colors,
	dashboardTheme: DashboardTheme,
	remainingRouteInfoControlTheme: RemainingRouteInfoControlTheme,
	nextManeuverControlTheme: NextManeuverControlTheme,
	speedControlTheme: SpeedControlTheme,
	cameraControlTheme: CameraControlTheme,
	messageBarControlTheme: MessageBarControlTheme,
	mapControlsTheme: MapControlsTheme,
	betterRouteControlTheme: BetterRouteControlTheme,
	thermometerTheme: ThermometerTheme,
	routeOverviewControlTheme: RouteOverviewControlTheme
)
Parameters

colors

Colors

dashboardTheme

DashboardTheme

remainingRouteInfoControlTheme

RemainingRouteInfoControlTheme

nextManeuverControlTheme

NextManeuverControlTheme

speedControlTheme

SpeedControlTheme

cameraControlTheme

CameraControlTheme

messageBarControlTheme

MessageBarControlTheme

mapControlsTheme

MapControlsTheme

betterRouteControlTheme

BetterRouteControlTheme

thermometerTheme

ThermometerTheme

routeOverviewControlTheme

RouteOverviewControlTheme
Properties
NavigationViewTheme.Colors
NavigationViewTheme.DashboardTheme
NavigationViewTheme.RemainingRouteInfoControlTheme
NavigationViewTheme.NextManeuverControlTheme
NavigationViewTheme.SpeedControlTheme
NavigationViewTheme.CameraControlTheme
NavigationViewTheme.MessageBarControlTheme
NavigationViewTheme.MapControlsTheme
NavigationViewTheme.BetterRouteControlTheme
NavigationViewTheme.ThermometerTheme
NavigationViewTheme.RouteOverviewControlTheme

static let `default`​

Default navigator theme.

NoopCancellable​

Ready-made ICancellable implementation that does not override anything.

Implements: ICancellable
public init()
Methods
public func cancel()

ObstacleInfo​

Obstacle information on the route.

public init(
    type: Obstacle = Obstacle.other,
    limitation: ObstaclePassLimitation = ObstaclePassLimitation.unlimited
)
Parameters

type

limitation

Properties

var type​

var limitation​

ObstacleInfoRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: ObstacleInfo
)
Parameters

point

value

Properties

var point​

var value​

ObstacleInfoRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: ObstacleInfo
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

Opacity​

Opacity - from 0.0 (full transparency) to 1.0 (full opacity).

public init(
    value: Float = 0
)
Parameters

value

Float
Properties

var value​

Float

OpeningHours​

Hours of operation for the organization.

public init(
    weekOpeningHours: [[WeekTimeInterval]],
    isOpen24x7: Bool
)
Parameters

weekOpeningHours

isOpen24x7

Properties

var weekOpeningHours​

Hours of operation for each day of the week, starting on Monday.

var isOpen24x7​

OrderedValue​

Describes one value from the set.

public init(
    value: String,
    text: String?
)
Parameters

value

text

Properties

var value​

Value by which filtering is done.

var text​

Value name.

OrderedValues​

Describes a set of sorted values.

public init(
    values: [OrderedValue],
    currentMinIndex: UInt64? = nil,
    currentMaxIndex: UInt64? = nil
)
Parameters

values

currentMinIndex

currentMaxIndex

Properties

var values​

Set of values. Sorted in the ascending order.

var currentMinIndex​

Index of the currently set minimum value.

var currentMaxIndex​

Index of the currently set maximum value.

PackageInfo​

Package information. See IPackage.

public init(
    name: String,
    installed: Bool = false,
    incomplete: Bool = true,
    preinstalled: Bool = false,
    compatible: Bool = false,
    hasUpdate: Bool = false,
    error: PackageInfoError?,
    updateStatus: PackageUpdateStatus = PackageUpdateStatus.notAvailable,
    finalSizeOnDisk: UInt64? = nil,
    currentSizeOnDisk: UInt64 = 0
)
Parameters

name

installed

incomplete

preinstalled

compatible

hasUpdate

error

updateStatus

finalSizeOnDisk

currentSizeOnDisk

Properties

var name​

Localized name of the package.

var installed​

Installation sign - true if the package has been selected for installation.

var incomplete​

Sign of incomplete installation - true if there is no fully downloaded version of the package (possibly incompatible with the current SDK version).

var preinstalled​

Sign of preinstalled packages. Preinstalled packages are always installed and fully loaded, and cannot be removed.

var compatible​

Compatibility sign - true in case the downloaded package is compatible with the current SDK version.

var hasUpdate​

Update availability sign is true in case there is an update for the downloaded package. It is possible situation, when during update process to new version even newer version of the package became available on the server. In this case the value will be true both during and after the upgrade.

var error​

Error that occurs during an attempt to download and/or install a package. If no error occurs, nil is returned.

var updateStatus​

Package upgrade status.

var finalSizeOnDisk​

Size of the disk space that the territory takes after installation, in bytes. Uninitialized value indicates that the territory does not contain files (this information is obtained from a preinstalled status file that does not contain a list of territory files).

var currentSizeOnDisk​

Size of the disk space that currently installed territory files take, in bytes

Padding​

Padding the edges of the camera.

public init(
    left: UInt32 = 0,
    top: UInt32 = 0,
    right: UInt32 = 0,
    bottom: UInt32 = 0
)
Parameters

left

top

right

bottom

Properties

var left​

Padding from left to inside.

var top​

Padding from top to bottom inward.

var right​

Padding right inward.

var bottom​

Padding at bottom inward.

ParkingCapacity​

Parking capacity.

public init(
    total: String?,
    specialSpaces: [SpecialSpace]
)
Parameters

total

specialSpaces

Properties

var total​

Total parking capacity, parking spaces.

var specialSpaces​

Description of special parking spaces.

ParkingInfo​

General information about the parking lot.

public init(
    type: ParkingType?,
    purpose: ParkingPurpose,
    access: ParkingAccess,
    pavingType: ParkingPavingType?,
    isPaid: Bool,
    isIncentive: Bool,
    forTrucks: Bool,
    levelCount: UInt16?,
    capacity: ParkingCapacity?
)
Parameters

type

purpose

access

pavingType

isPaid

isIncentive

forTrucks

levelCount

capacity

Properties

var type​

Type.

var purpose​

Value.

var access​

Access type.

var pavingType​

Coverage type.

var isPaid​

Whether the parking lot is a paid parking lot.

var isIncentive​

Whether the parking lot is intercepting.

var forTrucks​

Are there spaces for trucks.

var levelCount​

Number of levels.

var capacity​

Capacity.

PedestrianBriefRouteInfo​

Basic information about the walking route.

public init(
    length: RouteDistance,
    landmark: String
)
Parameters

length

landmark

Properties

var length​

Route length.

var landmark​

Landmark.

PedestrianInstructionCrossroad​

Description of maneuvers when passing through an intersection or crosswalk.

public init(
    landmark: PedestrianInstructionCrossroadLandmark = PedestrianInstructionCrossroadLandmark.`none`,
    maneuvers: [PedestrianInstructionCrossroadManeuver]
)
Parameters

landmark

maneuvers

Properties

var landmark​

Landmark.

var maneuvers​

Chain of sequential maneuvers.

PedestrianInstructionCrossroadManeuver​

public init(
    direction: PedestrianInstructionCrossroadManeuverDirection = PedestrianInstructionCrossroadManeuverDirection.straight,
    turnAngle: Int32 = 0
)
Parameters

direction

turnAngle

Int32
Properties

var direction​

Direction of travel.

var turnAngle​

Int32

Turning angle in degrees [-180, 180].

PedestrianInstructionFinish​

End of the pedestrian part of the route.

public init()

PedestrianInstructionIndoorEnter​

Entrance to the building.

public init(
    levelId: LevelId = LevelId()
)
Parameters

levelId

Properties

var levelId​

Floor ID after entering the building.

PedestrianInstructionIndoorExit​

Building exit.

public init()

PedestrianInstructionIndoorFloorChange​

Floor change in the building.

public init(
    type: PedestrianInstructionIndoorFloorChangeType = PedestrianInstructionIndoorFloorChangeType.undefined,
    beginId: LevelId = LevelId(),
    endId: LevelId = LevelId()
)
Parameters

type

beginId

endId

Properties

var type​

Floor change type.

var beginId​

Floor ID before shift.

var endId​

Floor ID after shift.

PedestrianInstructionStart​

Starts of the walking part of the route.

public init()

PedestrianRouteSearchOptions​

Pedestrian route search options.

public init(
    avoidStairways: Bool = false,
    avoidUnderpassesAndOverpasses: Bool = false,
    useIndoor: Bool = true,
    excludedAreas: [ExcludedArea] = []
)
Parameters

avoidStairways

avoidUnderpassesAndOverpasses

useIndoor

excludedAreas

Properties

var avoidStairways​

Avoid stairs.

var avoidUnderpassesAndOverpasses​

Avoid underpasses and overpasses.

var useIndoor​

Build routes inside buildings.

var excludedAreas​

Excluded areas (not more than 25).

PersonalDataCollectionOptions​

Personal data collection and processing settings.

public init(personalDataCollectionConsent: PersonalDataCollectionConsent)
Parameters

personalDataCollectionConsent

Properties

User choice regarding the collection and processing of personal data.

static let `default`​

Default settings. Permission to collect and process personal data has been granted.

PolygonOptions​

Polygon parameters.

public init(
    contours: [[GeoPoint]],
    color: Color = Color(),
    strokeWidth: LogicalPixel = LogicalPixel(value: 0),
    strokeColor: Color = Color(),
    visible: Bool = true,
    userData: Any = (),
    zIndex: ZIndex = ZIndex(value: 0),
    levelId: LevelId? = nil
)
Parameters

contours

color

strokeWidth

strokeColor

visible

zIndex

levelId

Properties

var contours​

var color​

var strokeWidth​

var strokeColor​

var visible​

var userData​

Any

var zIndex​

Object drawing level.

var levelId​

Binding to the floor plan of the building.

PolylineOptions​

Polyline parameters.

public init(
    points: [GeoPoint],
    width: LogicalPixel = LogicalPixel(value: 1),
    color: Color = Color(),
    erasedPart: Double = 0,
    dashedPolylineOptions: DashedPolylineOptions? = nil,
    gradientPolylineOptions: GradientPolylineOptions? = nil,
    visible: Bool = true,
    userData: Any = (),
    zIndex: ZIndex = ZIndex(value: 0),
    levelId: LevelId? = nil
)
Parameters

points

width

color

erasedPart

dashedPolylineOptions

gradientPolylineOptions

visible

zIndex

levelId

Properties

var points​

Polyline points.

var width​

Polyline width.

var color​

Main color of the polyline.

var erasedPart​

Proportion of erased part of the polyline, must be in the [0; 1] range.

var dashedPolylineOptions​

Dashed polyline options.
Dashed gradient line is not currently supported, so if both dashed_polyline_options and gradient_polyline_options are present in PolylineOptions, the dashed_polyline_options will be ignored when creating a polyline.

var gradientPolylineOptions​

Gradient polyline options.
Dashed gradient line is not currently supported, so if both dashed_polyline_options and gradient_polyline_options are present in PolylineOptions, the dashed_polyline_options will be ignored when creating a polyline.

var visible​

Visibility of a polyline.

var userData​

Any

User data.

var zIndex​

Object drawing level.

var levelId​

Binding to the floor plan of the building.

PublicBriefRouteInfo​

Basic information about the route on public transportation.

public init(
    publicTransportInfos: [PublicBriefRouteTransportInfo]
)
Parameters

publicTransportInfos

Properties

var publicTransportInfos​

Description of route options on public transportation.

PublicBriefRouteTransportInfo​

Description of the means of public transportation.

public init(
    type: PublicTransportType = PublicTransportType.bus,
    names: [String],
    color: UInt32?,
    routeLogo: String
)
Parameters

type

names

color

routeLogo

Properties

var type​

Type of public transport vehicle.

var names​

Names of the used public transport routes.

var color​

ARGB representation of the color associated with a given public transport mode, such as the color of a subway line. If there is no information about the color, the field will be nil.

Icon identifier for route stops. An empty string if no information is available. Technical field.

PublicRoutePart​

Description of the section of the route on public transportation.

public init(
    transports: [PublicTransportInfo],
    intermediateStops: [PublicTransportStop]
)
Parameters

transports

intermediateStops

Properties

var transports​

Types of public transport that can be used to travel this section of the route.
If the list is empty, this route section is suggested to be traveled by private or rented transport or on foot.

var intermediateStops​

Intermediate stops that transport will pass before reaching the transfer point.

PublicTransportInfo​

Description of the means of public transportation.

public init(
    type: PublicTransportType = PublicTransportType.bus,
    names: [String],
    suggestedCarNumbers: [UInt32],
    boardingSuggest: String,
    color: UInt32?,
    routeLogo: String
)
Parameters

type

names

suggestedCarNumbers

boardingSuggest

color

routeLogo

Properties

var type​

Type of public transport vehicle.

var names​

Names of the used public transport routes.

var suggestedCarNumbers​

Car numbers in that boarding recommended.
If a vehicle consists of a single car or one can board any car, this list will be empty.

var boardingSuggest​

Text description of the cars in which boarding is recommended.

var color​

ARGB representation of the color associated with a given public transport mode, such as the color of a subway line. If there is no information about the color, the field will be nil.

Icon identifier for route stops. An empty string if no information is available. Technical field.

PublicTransportRouteSearchOptions​

Route search options on public transport.

public init(
    startTime: Date? = nil,
    useSchedule: Bool = false,
    transportTypes: PublicTransportTypeOptionSet = []
)
Parameters

startTime

Date?

useSchedule

transportTypes

Properties

var startTime​

Date?

Time in UTC for which the route is to be plotted. If not specified, the current time is used.

var useSchedule​

Public transport schedules are taken into account when constructing the route.

var transportTypes​

Types of public transport. If not filled in, routes will be built for all supported public transport types.

PublicTransportStop​

Description of the public transport stop.

public init(
    name: String,
    coordinates: GeoPoint
)
Parameters

name

coordinates

Properties

var name​

The name of the stop.

var coordinates​

Geographic coordinates of the stop.

PublicTransportTransfer​

Description of the way to get by public transport to the next transfer point.

public init(
    startPointName: String,
    finishPointName: String,
    routeParts: [PublicRoutePart]
)
Parameters

startPointName

finishPointName

routeParts

Properties

var startPointName​

Name of the point from which the movement starts for this section of the route.

var finishPointName​

Name of the destination point for this section of the route.

var routeParts​

Description of the route section on public transport to get to the next transfer point.

PublicTransportTransferRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: PublicTransportTransfer
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

PublicTransportTypeOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let bus​

Bus.

static let trolleybus​

Trolleybus.

static let tram​

Tram.

static let shuttleBus​

Shuttle bus.

static let metro​

Subway.

static let suburbanTrain​

Suburban train.

static let funicularRailway​

Funicular.

static let monorail​

Monorail.

static let waterwayTransport​

Water transport.

static let cableCar​

Cable car.

static let speedTram​

High-speed tram.

static let premetro​

Underground tram.

static let lightMetro​

Light metro.

static let aeroexpress​

Aeroexpress.

static let moscowCentralRing​

Moscow Central Ring.

static let moscowCentralDiameters​

Moscow Central Diameters.

PurposeCode​

Code of the purpose of the building.

public init(
    value: UInt64 = 0
)
Parameters

value

Properties

var value​

RangeFilter​

Filter of value ranges.

public init(
    tagName: String,
    displayName: String,
    minValue: Double,
    maxValue: Double
)
Parameters

tagName

displayName

minValue

maxValue

Properties

var tagName​

Filter tag.

var displayName​

Name of the filter to display.
Depends on the output language. Not all names can be translated.

var minValue​

Minimum value of the range.

var maxValue​

Maximum value of the range.

RenderedObject​

Displayed map object.

public init(
    item: MapObject,
    source: Source,
    levelId: LevelId? = nil
)
Parameters

item

source

levelId

Properties

var item​

Map object.

var source​

Data source containing the map object.

var levelId​

Identifier of the floor plan of the building on which the object is located.

RenderedObjectInfo​

Detailed information about the displayed map object.

public init(
    closestViewportPoint: ScreenPoint,
    closestMapPoint: GeoPointWithElevation,
    item: RenderedObject
)
Parameters

closestViewportPoint

closestMapPoint

item

Properties

var closestViewportPoint​

Nearest object point in the screen coordinates.

var closestMapPoint​

Nearest point of the object in map coordinates.

var item​

Displayed object on the map.

Reviews​

Reviews.

public init(
    rating: Float,
    count: UInt32
)
Parameters

rating

Float

count

Properties

var rating​

Float

Rating between 0 and 5.

var count​

Number of reviews.

RoadCameraInfo​

Camera information.

public init(
    purposes: CameraPurposeOptionSet,
    speedLimit: UInt16?
)
Parameters

purposes

speedLimit

Properties

var purposes​

Camera purpose.
May be missing if there is no information, or if the camera was added by a user.

var speedLimit​

Speed limit in km/h.

RoadEventActionInfo​

Action information.

public init(
    state: RoadEventActionState,
    count: UInt32?
)
Parameters

state

count

Properties

var state​

Action state.

var count​

Number of actions applied to the event by all users (for custom events only).

RoadEventCardViewOptions​

Traffic event card settings.

public init(
	timeFormattingStrategy: TimeFormattingStrategy = .default
)

Settings constructor.

Parameters

timeFormattingStrategy

Method of formatting date/time.

Properties

var timeFormattingStrategy​

static var `default`​

Default traffic event card settings.

RoadEventDisplayCategoryOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let camera​

Cameras of all types, including those added by the user.

static let comment​

Comments on the roads.

static let accident​

Traffic accident.

static let roadRestriction​

Road closures.

static let roadWorks​

Road works.

static let other​

Events in the Other category.

static let user​

Always displays events created by the current user, regardless of their category.

RoadEventRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: BriefRoadEvent
)
Parameters

point

value

Properties

var point​

var value​

RoadRuleRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RoadRule
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

RoadSubtypeRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RoadSubtype
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

RoadSurfaceRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RoadSurface
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

RoadTypeRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RoadType
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

RouteBuildOptions​

The structure that describes the route building parameters in the navigator.

public init(
    finishPoint: RouteSearchPoint,
    routeSearchOptions: RouteSearchOptions
)
Parameters

finishPoint

routeSearchOptions

Properties

var finishPoint​

The point to which the route is built.

var routeSearchOptions​

Route search parameters.

RouteCamera​

Structure describing the traffic camera.

public init(
    purposes: RouteCameraPurposeOptionSet,
    rangeAgainst: RouteDistance,
    rangeAlong: RouteDistance,
    direction: RouteCameraDirection = RouteCameraDirection.against,
    maxSpeedLimit: Float?
)
Parameters

purposes

rangeAgainst

rangeAlong

direction

maxSpeedLimit

Float?
Properties

var purposes​

Camera purposes.

var rangeAgainst​

Range of camera action against the motion.

var rangeAlong​

Range of the camera against the motion.

var direction​

Direction of camera action.

var maxSpeedLimit​

Float?

Speed in m/s, the exceeding of which is captured by a camera. Missing if the camera does not detect exceeding the speed limit.

RouteCameraPurposeOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let speedControl​

Recording of exceeding the speed limit.

static let trafficLightsControl​

Recording of passing at the forbidden signal of traffic lights.

static let stopLineControl​

Recording of driving over the stop line, driving without stopping the stop sign, driving to the intersection during a jam.

static let publicTransportLaneControl​

Recording of movement on the dedicated lane for public transport.

static let oncomingTrafficLaneControl​

Recording driving in the oncoming lane.

static let pedestrianAdvantageControl​

Recording of failure to give preference to pedestrians.

static let laneDisciplineControl​

Recording of violation of lane rotation at the intersection.

static let roadMarkingsCrossingControl​

Recording of crossing the solid line of road markings, driving on the side of the road.

static let averageSpeedControl​

Recording of exceeding the average speed on the section.

static let noStoppingControl​

Recording of violation of prohibition of stopping.

static let dummy​

Fake item.

static let platon​

Platon” system camera: https://platon.ru/en/about/.

RouteDistance​

Distance along the route.

public init(
    millimeters: Int64 = 0
)
Parameters

millimeters

Int64
Properties

var millimeters​

Int64

RouteEditorRouteParams​

Route parameter information.

public init(
    startPoint: RouteSearchPoint,
    finishPoint: RouteSearchPoint,
    routeSearchOptions: RouteSearchOptions,
    intermediatePoints: [RouteSearchPoint] = []
)
Parameters

startPoint

finishPoint

routeSearchOptions

intermediatePoints

Properties

var startPoint​

var finishPoint​

var routeSearchOptions​

var intermediatePoints​

RouteEditorRoutesInfo​

Information about the routes the editor operates on.

public init(
    routes: [TrafficRoute],
    routeParams: RouteEditorRouteParams
)
Parameters

routes

routeParams

Properties

var routes​

When the route list is updated, the first route will be active if the route list is not empty.

var routeParams​

Route parameters for which the search was performed. Can be different from the parameters passed to the editor, if routes were found already after the parameters were changed in the editor.

RouteExitSign​

Exit sign information.

public init(
    type: RouteExitSignType = RouteExitSignType.undefined,
    roadNameTable: RouteExitSignTable,
    roadNumberTable: RouteExitSignTable?
)
Parameters

type

roadNameTable

roadNumberTable

Properties

var type​

Exit type.

var roadNameTable​

Exit sign with the road name.

var roadNumberTable​

Exit sign with the road number.

RouteExitSignRouteEntry​

Route element - a point and a value in it.

public init(
    point: RoutePoint,
    value: RouteExitSign
)
Parameters

point

value

Properties

var point​

var value​

RouteExitSignTable​

Exit sign information.

public init(
    backgroundColor: RouteExitSignTableColor = RouteExitSignTableColor.undefined,
    text: String
)
Parameters

backgroundColor

text

Properties

var backgroundColor​

Background color of an exit sign.

var text​

Exit sign text.

RouteIndex​

Active route index.

public init(
    value: UInt64 = 0
)
Parameters

value

Properties

var value​

RouteInfo​

Route description with maneuvers.

public init(
    route: Route,
    routeBuildOptions: RouteBuildOptions?,
    external: Bool = false
)
Parameters

route

routeBuildOptions

external

Properties

var route​

Route.

var routeBuildOptions​

Route construction parameters in the navigator. The nil value means that the route has no finish point. In this case, a section of road, which is supposedly used by the user, is calculated based on the road graph and parameters of the user's movement and is returned as a route in the route field. Consequently, this route cannot contain instructions, and the last point in this route is not the destination point to which the user is moving, but simply the point to which the user's movement was predicted. It is not known where the user will go next. This mode of the navigator operation is called a mode of guidance without a route or free roam.

var external​

Route source. True - the route is passed to the navigator externally in the start method. False - the route is generated by the navigator.

RouteInstruction​

The instruction that must be executed to drive the route.

public init(
    roadName: String,
    range: RouteDistance,
    extraInstructionInfo: ExtraInstructionInfo
)
Parameters

roadName

range

extraInstructionInfo

Properties

var roadName​

Name of the road on which the user will end up after performing the maneuver.

var range​

Distance after the instruction point, during which the user is considered to be in the instruction coverage area.

var extraInstructionInfo​

Specific information for a particular type of instruction.

RouteLane​

Structure describing a single lane.

public init(
    routeManeuver: RouteLaneManeuver = RouteLaneManeuver.undefined,
    maneuvers: RouteLaneManeuverOptionSet,
    speedLimit: Float = 0,
    prohibited: Bool = false,
    onlyPublicTransport: Bool = false
)
Parameters

routeManeuver

maneuvers

speedLimit

Float

prohibited

onlyPublicTransport

Properties

var routeManeuver​

Maneuver to be performed to move along the route.

var maneuvers​

Allowed maneuvers to be made in the lane.

var speedLimit​

Float

Maximum permitted speed on the lane is m/s. 0 - speed limit is unknown.

var prohibited​

No passing in the lane.

var onlyPublicTransport​

Public transportation lane.

RouteLaneManeuverOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let undefined​

Not set.

static let forward​

Straight ahead.

static let right​

To the right.

static let left​

To the left.

static let slightlyRight​

Slightly to the right.

static let slightlyLeft​

Slightly to the left.

static let sharplyRight​

Sharply to the right.

static let sharplyLeft​

Sharply to the left.

static let rightWithLeftTurns​

To the right, then to the left.

static let turnover​

U-turn.

RouteLaneSign​

Description of the lanes.

public init(
    lanes: [RouteLane],
    signStartPoint: RoutePoint?,
    signPoint: RoutePoint?,
    signEndPoint: RoutePoint?
)
Parameters

lanes

signStartPoint

signPoint

signEndPoint

Properties

var lanes​

Lanes for cars on a road section. Listed in order from the edge to the middle of the roadway.
If the number of lanes is unknown or there is only one lane on the road in the direction of the route, this array is empty.

var signStartPoint​

Point on the route at which the lane traffic sign starts. nil if the starting position of the sign is unknown.

var signPoint​

Point on the route at which the lane control sign begins. nil if the position of the sign is unknown.

var signEndPoint​

Point on the route at which the lane control sign ends. nil if the end position of the sign is unknown.

RouteLevelInfo​

Building floor information corresponding to the route section.

public init(
    beginId: LevelId?,
    endId: LevelId?,
    name: String
)
Parameters

beginId

endId

name

Properties

var beginId​

Floor plan ID at the starting point of the route section. Not present if the point is not in a building.

var endId​

Floor plan ID at the end point of the route section. Not present if the point is not in a building.

var name​

Floor name. Empty if the route section connects different floors.

RouteLevelInfoRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: RouteLevelInfo
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

RouteMapObjectCalloutLabelFlagOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let duration​

Time of travel along the route.

static let length​

Route length.

RouteMapObjectDisplayFlagOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let routeParts​

Route segments.

static let startPoint​

Starting point of the route.

static let finishPoint​

Finish point of the route.

static let intermediatePoints​

Intermediate waypoints.

static let transportConnectionPoints​

Connection points of route segments (except for routes on public transport). For example, a point at the junction point of a pedestrian and automobile segment.

static let maneuvers​

Maneuvers.

static let cameras​

Cameras.

static let humps​

Artificial bumps.

static let barriers​

Road closures.

static let gates​

Gates, barriers.

static let stairways​

Stairs.

static let publicTransportPlatforms​

Public transport stops.

static let accidents​

Traffic accident.

static let roadWorks​

Road works.

static let comments​

Comments.

static let roadRestrictions​

Traffic closures.

static let otherEvents​

Other" events.

static let tollRoads​

Start and end of toll road.

static let lanesBubbles​

Lane bubbles (displayed only in source with navigation mode).

static let bubbles​

Lane bubbles with travel time and route length.

static let indoorInstructions​

Instructions in buildings. Move by elevator, escalator, etc.

static let inactiveFloors​

Shows parts of the route inside buildings not just for the active floor.

static let trafficLights​

Highlight traffic lights on the route.

static let immersiveRouteParts​

Use immersive geometry for route parts (used together with RouteParts).

RouteMapObjectPermanentDisplayFlagOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

The corresponding value of the raw type.

static let startPoint​

Starting point of the route.

static let finishPoint​

Finish point of the route.

static let intermediatePoints​

Intermediate waypoints.

static let cameras​

Cameras.

static let accidents​

Traffic accident.

static let roadWorks​

Road works.

static let comments​

Comments.

static let roadRestrictions​

Traffic closures.

static let otherEvents​

Other" events.

static let tollRoads​

Start and finish of toll road.

RoutePoint​

Point on the route, set as the distance along the route relative to the start of the route.

public init(
    distance: RouteDistance
)
Parameters

distance

Properties

var distance​

RouteSearchPoint​

Description of the points on which the route is built.

public init(
    coordinates: GeoPoint,
    course: Bearing? = nil,
    objectId: DgisObjectId = DgisObjectId(objectId: 0, entranceId: 0),
    levelId: LevelId? = nil
)
Parameters

coordinates

course

objectId

levelId

Properties

var coordinates​

Coordinates through which to route.

var course​

Direction in which to traverse the point.

var objectId​

ID of the object to which the walking part of the route will be traversed.

var levelId​

Identifier of the floor plan (for pedestrian routes).

RubricId​

Rubric ID.

public init(
    value: UInt64 = 0
)
Parameters

value

Properties

var value​

Schedule​

Road event action schedule.

public init(
    startTime: Date?,
    finishTime: Date?,
    weekTimeIntervals: [WeekTimeInterval]
)
Parameters

startTime

Date?

finishTime

Date?

weekTimeIntervals

Properties

var startTime​

Date?

Start time of action. None if unknown.

var finishTime​

Date?

Start time of action. None if unknown.

var weekTimeIntervals​

Intervals of operation within the week.

ScooterBriefRouteInfo​

Basic route information on the scooter.

public init(
    length: RouteDistance,
    landmark: String
)
Parameters

length

landmark

Properties

var length​

Route length.

var landmark​

Landmark.

ScooterInstructionCrossroad​

Description of maneuvers when passing through an intersection or crosswalk.

public init(
    landmark: ScooterInstructionCrossroadLandmark = ScooterInstructionCrossroadLandmark.`none`,
    maneuvers: [ScooterInstructionCrossroadManeuver]
)
Parameters

landmark

maneuvers

Properties

var landmark​

Landmark.

var maneuvers​

Chain of sequential maneuvers.

ScooterInstructionCrossroadManeuver​

public init(
    direction: ScooterInstructionCrossroadManeuverDirection = ScooterInstructionCrossroadManeuverDirection.straight,
    turnAngle: Int32 = 0
)
Parameters

direction

turnAngle

Int32
Properties

var direction​

Direction of travel.

var turnAngle​

Int32

Turning angle in degrees [-180, 180].

ScooterInstructionFinish​

End of the scooter part of the route.

public init()

ScooterInstructionStart​

Start of the scooter part of the route.

public init()

ScooterRouteSearchOptions​

Search parameters for scooter routes.

public init(
    avoidCarRoads: Bool = true,
    avoidStairways: Bool = true,
    avoidUnderpassesAndOverpasses: Bool = true,
    excludedAreas: [ExcludedArea] = []
)
Parameters

avoidCarRoads

avoidStairways

avoidUnderpassesAndOverpasses

excludedAreas

Properties

var avoidCarRoads​

Avoid roads.

var avoidStairways​

Avoid stairs.

var avoidUnderpassesAndOverpasses​

Avoid underpasses and overpasses.

var excludedAreas​

Excluded areas (not more than 25).

ScreenDistance​

Distance between objects on the screen in millimeters.
Cannot be negative.

public init(
    value: Float = 0
)
Parameters

value

Float
Properties

var value​

Float

ScreenPoint​

Point in screen coordinates.

public init(
    x: Float = 0,
    y: Float = 0
)
Parameters

x

Float

y

Float
init(_ cgPoint: CGPoint)
Parameters

cgPoint

Properties

var x​

Float

var y​

Float

ScreenShift​

Horizontal and vertical displacement of the map in the coordinates space of the screen.

public init(
    dx: Float = 0,
    dy: Float = 0
)
Parameters

dx

Float

dy

Float
init(_ cgVector: CGVector)
Parameters

cgVector

Properties

var dx​

Float

var dy​

Float

ScreenSize​

Size in pixels.

public init(
    width: UInt32 = 0,
    height: UInt32 = 0
)
Parameters

width

height

init(_ cgSize: CGSize)
Parameters

cgSize

Properties

var width​

var height​

SDKError​

Implements: ISDKError
public init(description: String)
Parameters

description

Properties

let description​

Textual representation of this instance.

var debugDescription​

Textual representation of this instance, suitable for debugging.

SegmentGeoPoint​

Describes a geographic point on the segment and the direction of the segment. The route geometry is a sequence of points that form segments in pairs. For all functions working with the route geometry, it is considered that the first point of the pair forming the segment is included in this segment, and the second one is not: [point_1, point_2),[point_2, point_3),...,[point_n-1, point_n)[point_last]. The last point forms a zero-length segment with itself. Thus, each point of the route belongs to exactly one segment. The direction of point_last is not defined.

public init(
    point: GeoPoint,
    bearing: Bearing
)
Parameters

point

bearing

Properties

var point​

var bearing​

SettlementRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: Settlement
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

SimpleClusterOptions​

Parameters of the cluster marker simple marker objects.

public init(
    icon: Image?,
    iconMapDirection: MapDirection? = nil,
    anchor: Anchor = Anchor(x: 0.5, y: 0.5),
    text: String? = nil,
    textStyle: TextStyle? = nil,
    iconOpacity: Opacity = Opacity(value: 1),
    iconWidth: LogicalPixel = LogicalPixel(value: 0),
    userData: Any = (),
    zIndex: ZIndex = ZIndex(value: 0),
    animatedAppearance: Bool = true,
    iconAnimationMode: AnimationMode = AnimationMode.normal
)
Parameters

icon

iconMapDirection

anchor

text

textStyle

iconOpacity

iconWidth

zIndex

animatedAppearance

iconAnimationMode

Properties

var icon​

var iconMapDirection​

var anchor​

var text​

var textStyle​

var iconOpacity​

var iconWidth​

Target width used for scaling.

var userData​

Any

var zIndex​

Object drawing level.

var animatedAppearance​

Whether to animate the appearance.

var iconAnimationMode​

Animation mode.

SimpleError​

public init(description: String)
Parameters

description

public static func == (lhs: SimpleError, rhs: SimpleError) -> Bool

Returns a Boolean value indicating whether two values are equal.

Properties

let description​

Textual representation of this instance.

var debugDescription​

Textual representation of this instance, suitable for debugging.

SimulationAutoWithOverSpeed​

Structure for setting the mode of driving taking into account the maximum speed on the route edge.

public init(
    overSpeed: Double = 0
)
Parameters

overSpeed

Properties

var overSpeed​

Used exceeding of the speed limit in m/s. Only values >= 0 are acceptable.

SimulationConstantSpeed​

Structure for setting the mode of driving with constant speed.

public init(
    speed: Double = 0
)
Parameters

speed

Properties

var speed​

Travel speed in m/s. Only values >= 0 are acceptable.

SortingFilter​

Sorting type.

public init(
    tagName: String,
    displayName: String
)
Parameters

tagName

displayName

Properties

var tagName​

Filter tag.

var displayName​

Filter name to display.
Depends on the resulting language. Not all names can be translated.

SoundCategoryOptionSet​

public init(rawValue: UInt32)

Creates a new option set from the given raw value.

Parameters

rawValue

Raw value of the option set to create. Each bit of rawValue potentially represents an element of the option set, though raw values may include bits that are not defined as distinct values of the OptionSet type.

Properties

var rawValue​

Corresponding value of the raw type.

static let crossroadCameras​

Intersection control cameras.

static let laneCameras​

Cameras recording traffic in the dedicated lane for public transport.

static let noStoppingControlCameras​

Stop control cameras.

static let roadMarkingCameras​

Traffic lane cameras.

static let averageSpeedCameras​

Average speed cameras.

static let maxSpeedCameras​

Instant speed cameras.

static let accidents​

Accidents.

static let roadWorks​

Road works.

static let tolls​

Toll roads.

static let exceedSpeedLimits​

Violations of maximum permitted speed.

static let intermediatePoints​

Intermediate points on the route.

static let routeRebuild​

Route is rebuilt.

static let instructions​

Instructions (maneuvers) on route.

static let obstacles​

Obstacles.

static let roadSubtypes​

Road subtypes.

static let lostLocation​

Lost GPS signal.

static let routeEnd​

Route completion.

SpecialSpace​

Special parking space.

public init(
    type: SpecialSpaceType,
    name: String,
    count: String?
)
Parameters

type

name

count

Properties

var type​

Type.

var name​

Localized name of a special place.

var count​

Number of spaces of this type in the parking lot.

SpeedRange​

Speed interval. Speeds are specified in meters per second.

public init(
    minSpeed: Double = 0,
    maxSpeed: Double = 0
)
Parameters

minSpeed

maxSpeed

Properties

var minSpeed​

var maxSpeed​

SpeedRangeToStyleZoom​

Matching speed interval and style zoom.

public init(
    range: SpeedRange,
    minDistanceToManeuver: RouteDistance,
    maxDistanceToManeuver: RouteDistance,
    styleZoom: StyleZoom
)
Parameters

range

minDistanceToManeuver

maxDistanceToManeuver

styleZoom

Properties

var range​

Speed interval.

var minDistanceToManeuver​

Minimum distance to the maneuver at which the smooth zoom level logic should be activated.

var maxDistanceToManeuver​

Maximum distance after the maneuver at which the smooth zoom level reduction should end.

var styleZoom​

Style zoom.

StringRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: String
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

StyleLayerId​

Style layer ID.

public init(
    id: String
)
Parameters

id

Properties

var id​

StyleZoom​

Style zoom level.
Cannot be negative.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

TaxiRouteSearchOptions​

Parameters for route search by taxi.

public init(
    car: CarRouteSearchOptions
)
Parameters

car

Properties

var car​

Route search parameters common to other car routes.

TextStyle​

Text appearance settings.

public init(
    fontSize: LogicalPixel = LogicalPixel(value: 8),
    color: Color = Color(),
    strokeWidth: LogicalPixel = LogicalPixel(value: 0.3499999940395355),
    strokeColor: Color = Color(argb: 4294967295),
    textPlacement: TextPlacement = TextPlacement.bottomCenter,
    textOffset: LogicalPixel = LogicalPixel(value: 0),
    fontName: String? = nil
)
Parameters

fontSize

color

strokeWidth

strokeColor

textPlacement

textOffset

fontName

Properties

var fontSize​

var color​

var strokeWidth​

var strokeColor​

var textPlacement​

var textOffset​

var fontName​

Theme​

Specifies a theme within some style (see Style).

public init(name: String)
Parameters

name

public init(stringLiteral value: String)

Creates an instance initialized to the given string value.

Parameters

value

Value of the new instance.

Properties

var description​

Textual representation of this instance.

Tilt​

Tilt angle in degrees, where 0 is nadir (looking vertically down), 90 is front horizon.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

TradeLicense​

License of the organization.

public init(
    type: String,
    license: String,
    legalForm: String,
    endDate: String
)
Parameters

type

license

legalForm

endDate

Properties

var type​

Type.

var license​

Number.

Company's form of ownership.

var endDate​

Date until that the license is valid.

TrafficControlState​

State of the traffic control.

public init(
    status: TrafficControlStatus = TrafficControlStatus.hidden,
    score: UInt32?
)
Parameters

status

score

Properties

var status​

Status, depending on which changes the appearance of the control.

var score​

Traffic score. Displayed as an inscription on the control. If absent, a blank icon is displayed.

TrafficScore​

Traffic rate.

public init(
    state: TrafficScoreState = TrafficScoreState.pending,
    value: UInt32?
)
Parameters

state

value

Properties

var state​

Value relevance.

var value​

Value in points. Typically values are in the range of 1 to 10. Blank value if the information is not yet received, or is already out of date, or is not available for the given location.

TrafficSpeedColorRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: TrafficSpeedColor
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

TrafficView​

UI control of the traffic jam visibility.

Properties

var body​

some View

Contents and behavior of the control.

TrafficViewColors​

public init(
	titleColor: SwiftUI.Color,
	enabledTitleColor: SwiftUI.Color,
	emptyStateLoadingColor: SwiftUI.Color,
	disabledInnerBackgroundColor: SwiftUI.Color,
	lowScoreColor: SwiftUI.Color,
	mediumScoreColor: SwiftUI.Color,
	highScoreColor: SwiftUI.Color,
	lowScoreDisabledColor: SwiftUI.Color,
	mediumScoreDisabledColor: SwiftUI.Color,
	highScoreDisabledColor: SwiftUI.Color
)
Parameters

titleColor

ColorSwiftUI.

enabledTitleColor

ColorSwiftUI.

emptyStateLoadingColor

ColorSwiftUI.

disabledInnerBackgroundColor

ColorSwiftUI.

lowScoreColor

ColorSwiftUI.

mediumScoreColor

ColorSwiftUI.

highScoreColor

ColorSwiftUI.

lowScoreDisabledColor

ColorSwiftUI.

mediumScoreDisabledColor

ColorSwiftUI.

highScoreDisabledColor

ColorSwiftUI.
Properties

static let `default`​

TransportTypeRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: TransportType
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

TruckPassZoneId​

Identifier of the pass zone for trucks. The value 0 corresponds to the absence of the pass zone.

public init(
    value: UInt32 = 0
)
Parameters

value

Properties

var value​

TruckPassZoneIdRouteLongEntry​

Extended route element - segment and value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: TruckPassZoneId
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

TruckPassZonePass​

Pass allowing truck traffic in the pass zones.

public init(
    id: TruckPassZonePassId,
    name: String,
    passZoneIds: Set<TruckPassZoneId>
)
Parameters

id

name

Properties

var id​

Skip ID.

var name​

Skip name.

var passZoneIds​

Set<TruckPassZoneId>

IDs of the pass zones that can be accessed with this pass.

TruckPassZonePassId​

Skip ID.

public init(
    value: UInt32 = 0
)
Parameters

value

Properties

var value​

TruckRouteSearchOptions​

Truck route search parameters. Only filled parameters are taken into account when searching a route.

public init(
    car: CarRouteSearchOptions,
    truckLength: UInt32? = nil,
    truckHeight: UInt32? = nil,
    truckWidth: UInt32? = nil,
    actualMass: UInt32? = nil,
    maxPermittedMass: UInt32? = nil,
    axleLoad: UInt32? = nil,
    dangerousCargo: Bool = false,
    explosiveCargo: Bool = false,
    passIds: Set<TruckPassZonePassId> = [],
    fallbackOnCar: Bool = false
)
Parameters

car

truckLength

truckHeight

truckWidth

actualMass

maxPermittedMass

axleLoad

dangerousCargo

explosiveCargo

fallbackOnCar

Properties

var car​

Route search parameters common to other car routes.

var truckLength​

Length of cargo vehicle in millimeters.

var truckHeight​

Cargo vehicle height in millimeters.

var truckWidth​

Cargo vehicle width in millimeters.

var actualMass​

Actual weight of cargo vehicle in kilograms.

var maxPermittedMass​

Permissible maximum weight of cargo vehicle in kilograms.

var axleLoad​

Axle load in kilograms.

var dangerousCargo​

Dangerous cargo indication.

var explosiveCargo​

Indication of the presence of explosives in cargo.

var passIds​

Set<TruckPassZonePassId>

Identifiers of the user's existing passes required to move within the pass zones.

var fallbackOnCar​

Use of automatic fallback from cargo route search to vehicle route search when unable to find a cargo route that satisfies the search parameters.

UIMarkerInfo​

ID of an object with caption.

public init(
    objectId: DgisObjectId,
    label: String?
)
Parameters

objectId

label

Properties

var objectId​

var label​

UIntRouteLongEntry​

Extended route element - a segment and a value on it.

public init(
    point: RoutePoint,
    length: RouteDistance,
    value: UInt32
)
Parameters

point

length

value

Properties

var point​

var length​

var value​

VendorConfigFromAsset​

Overwrites SDK settings by specifying the path to the application asset. For Android - assets directory. For iOS - Bundle.main directory.

public init(
    path: String
)
Parameters

path

Properties

var path​

Path relative to the asset root directory.

VendorConfigFromFile​

Overwrites SDK settings by specifying the path to a file in the device file system.

public init(
    path: String
)
Parameters

path

Properties

var path​

File path.

VendorConfigFromString​

Overwrites SDK settings by specifying the file contents.

public init(
    contents: String
)
Parameters

contents

Properties

var contents​

Contents of the file for overwriting settings.

WeekTime​

Timestamp within a week.

public init(
    weekDay: WeekDay,
    time: DayTime
)
Parameters

weekDay

time

public static func < (lhs: WeekTime, rhs: WeekTime) -> Bool

Returns a Boolean value indicating whether the value of the first argument is less than that of the second argument.

Properties

var weekDay​

Day of the week.

var time​

Time.

WeekTimeInterval​

Time interval during the week.

public init(
    startTime: WeekTime,
    finishTime: WeekTime
)
Parameters

startTime

finishTime

Properties

var startTime​

Start time.

var finishTime​

End time.

WmsRasterUrlTemplate​

public init(
    urlTemplate: String
)
Parameters

urlTemplate

Properties

var urlTemplate​

WorkStatus​

Operating status.

public init(
    isOpen: Bool,
    description: String
)
Parameters

isOpen

description

Properties

var isOpen​

Is open now.

var description​

Textual description. For example: “Open till 21:00”, “Open 24/7”, “Closes in 5 minutes”.

ZIndex​

Index that sets the order in which objects are rendered within a layer.

public init(
    value: UInt32 = 0
)
Parameters

value

Properties

var value​

Zoom​

Zoom level.
Cannot be negative.

public init(
    value: Float = 0
)
Parameters

value

Float
public init(floatLiteral value: Float)

Creates an instance initialized to the specified floating-point value.

Parameters

value

Float

Value to create.

Properties

var value​

Float

ZoomView​

UI control of zooming in and out in SwiftUI.

Properties

var body​

some View

Contents and behavior of the control.