enumeration
ActionResult
AddEventError
networkError
Network error.
territoryNotSupported
Attempted to add an event outside of 2GIS projects.
unknownUserLocation
Unknown current user position. Road events can only be added with a known position.
userLocationTooFarFromEvent
The user is too far away from the location of the event to be added.
notAuthorized
Attempted to add an anonymous event in an area where user authorization is required.
noPersonalDataCollectionConsent
User has refused to collect and submit personal data.
userBlocked
User is blocked.
tooManyRequests
User creates events too often.
AddEventResult
AddressComponent
Alignment
AnimationMode
AttributeValue
AudioFocusPolicy
AuthorType
BearingSource
BetterRouteResponse
BicycleInstructionCrossroadLandmark
BicycleInstructionCrossroadManeuverDirection
BriefExtraRouteInfo
CalloutVisualizationMode
always
Shows callouts (including DisplayFlag) and calculates positions for them if at least one route is added to the source.
multipleRoutes
Show bubbles (considering DisplayFlag) and calculate positions for them only if more than one route object is added to the source.
none
Do not show bubbles and do not calculate positions for them.
CameraAnimatedMoveReason
CameraAnimatedMoveResult
finished
Moving the camera position is complete when the finish point is reached.
cancelledByEvent
Camera position movement canceled by a map event (shift, zoom, etc.).
cancelledByApplication
New flyover is started, position is changed (explicitly or implicitly via ICamera::set_position_point() or ICamera::set_padding()), or tracking mode is changed.
CameraAnimationType
`default`
Type of flyover is selected depending on the distance between the starting and the finish positions.
linear
Linear change of camera position parameters.
showBothPositions
Zoom is changed to try and display the start and end positions at some point in the flyover. Positions may not be displayed if the current restrictions (see ICamera::zoom_restrictions()) do not allow setting such a small zoom level.
CameraBehaviourChangeReason
application
Changes the mode by the application, setting the position (explicitly or indirectly via ICamera::set_position_point()), launching the flyover.
event
Tracking mode changed because of a map event. Depending on the event, the tracking mode for position, rotation angle, tilt angle, or scale may reset, see CameraBehaviour.
CameraFollowState
CameraPurpose
speedControl
Recording of exceeding the speed limit.
averageSpeedControl
Recording of exceeding the average speed on the section.
publicTransportLaneMovementControl
Recording of movement on the dedicated lane for public transport.
roadMarkingsCrossingControl
Recording of crossing the solid line of road markings, driving on the side of the road.
trafficLightsViolationControl
Recording of passing at the forbidden signal of traffic lights.
stopLineCrossingControl
Recording of driving over the stop line, driving without stopping the stop sign, driving to the intersection during a jam.
oncomingTrafficLaneMovementControl
Recording driving in the oncoming lane.
pedestrianAdvantageViolationControl
Recording failure to give priority to pedestrians.
laneDisciplineControl
Recording of violation of lane rotation at the intersection.
noStoppingViolationControl
Recording of violation of prohibition of stopping.
dummy
Fake item.
truck
Platon system camera, truck restriction control camera.
CameraState
CarBriefRouteInfoTrafficSpeed
CarInstructionCrossroadDirection
CarInstructionCrossroadLandmark
CarInstructionRoundaboutType
CheckableItemType
CopyrightAlignment
DesiredAccuracy
low
Low geopositioning accuracy. The most suitable mode for determining the current city/district. This mode is notable for its low power consumption. In this mode, the device can either rely solely on networks (Wi-Fi, 3GPP, IP) or use the GNSS receiver in the low-power mode (caching the geoposition for a long time).
medium
Geo-positioning accuracy provided by a standard GNSS receiver. The most appropriate mode for displaying your current location on the map. If a GNSS receiver is installed on your device and the satellites are in view, the data from the satellites is used to determine your location. Otherwise, alternative geo-positioning sources are used.
high
Geo-positioning accuracy provided by a standard GNSS receiver and possibly enhanced by additional means. The most suitable mode for route guidance. Similar to the Medium mode, but the GNSS receiver can be switched to a higher accuracy mode or additional sensors can be used to refine geopositioning. May consume a lot of power (the device in this mode is usually connected to a power source).
DgisSourceWorkingMode
online
Gets data from 2GIS servers.
offline
Works with pre-loaded data.
hybridOnlineFirst
Hybrid mode, which gives priority to obtaining data from 2GIS servers. Pre-loaded data is used if, for some reason, it was not possible to obtain data from the servers or the pre-loaded data matches the data on the server.
hybridOfflineFirst
Hybrid mode, which gives priority to using pre-loaded data. Data from 2GIS servers is used if there is no pre-loaded data.
DistanceFormattingStrategy
DurationFormattingStrategy
DurationValueFormattingStrategy
DynamicFilter
ExcludedAreaSeverity
ExcludedAreaType
point
Excluded region is a circle with the center at the first point of 'points' and a radius equal to 'extent'. The 'points' must contain exactly one point, otherwise the query fails.
polyline
Excluded area is a polyline with width equal to 'extent' (points - line nodes).
polygon
Excluded region is a polygon with vertices at 'points'. In this case, the sides of the polygon are additionally padded by 'extent'.
ExtraInstructionInfo
FilterType
FollowBearing
FollowStyleZoom
FollowTilt
FollowValue
FormattingType
GeometryKind
GraphicsPreset
lite
Simplified rendering mode: "heavy" graphic effects are disabled whenever possible.
normal
Standard rendering mode: visual quality of the image and resource consumption are balanced.
immersive
Immersive mode: all "heavy" graphic effects are enabled.
This can lead to significant performance degradation on weak devices.
ImageFormat
IndoorManagerState
InstructionManeuver
none
No maneuver.
start
Start of movement.
finish
End of movement.
crossroadStraight
Moving through the intersection straight ahead.
crossroadSlightlyLeft
Moving through the intersection slightly to the left.
crossroadLeft
Moving through the intersection to the left.
crossroadSharplyLeft
Moving through the intersection sharply to the left.
crossroadSlightlyRight
Moving through the intersection slightly to the right.
crossroadRight
Moving through the intersection to the right.
crossroadSharplyRight
Moving through the intersection sharply to the right.
crossroadKeepLeft
Going through the intersection - keep to the left.
crossroadKeepRight
Going through the intersection - keep to the right.
crossroadUTurn
Turning at the intersection.
roundaboutForward
Going through the roundabout straight ahead.
roundaboutLeft45
Going through the roundabout slightly to the left.
roundaboutLeft90
Going through the roundabout to the left.
roundaboutLeft135
Going through the roundabout sharply to the left.
roundaboutRight45
Going through the roundabout slightly to the right.
roundaboutRight90
Going through the roundabout to the right.
roundaboutRight135
Going through the roundabout sharply to the right.
roundaboutBackward
Going through an intersection with traffic circle traffic in the opposite direction.
roundaboutExit
Exiting a traffic circle intersection.
uTurn
U-turn.
roadCrossing
Compound maneuver at an intersection (e.g., crossing two roads at an intersection for a pedestrian route).
JSONValue
public init(nilLiteral: ())
Creates an instance initialized with .
This documentation comment was inherited from .
public init(booleanLiteral value: Bool)
Creates an instance initialized to the given Boolean value.
This documentation comment was inherited from .
value
Value of the new instance.
public init(integerLiteral value: Int64)
Creates an instance initialized to the specified integer value.
This documentation comment was inherited from .
value
The value to create.
public init(floatLiteral value: Double)
Creates an instance initialized to the specified floating-point value.
This documentation comment was inherited from .
value
The value to create.
public init(stringLiteral value: String)
Creates an instance initialized to the given string value.
This documentation comment was inherited from .
value
Value of the new instance.
public init(arrayLiteral elements: JSONValue...)
Creates an instance initialized with the given elements.
This documentation comment was inherited from .
elements
public init(dictionaryLiteral elements: (String, JSONValue)...)
Creates an instance initialized with the given key-value pairs.
This documentation comment was inherited from .
public init(from decoder: Decoder) throws
Creates a new instance by decoding from the given decoder.
decoder
Decoder to read data from.
public func encode(to encoder: Encoder) throws
Encodes this value into the given encoder.
encoder
Encoder to write data to.
KeySource
Lane
LanesControlImage
dotsLeft
Dots on the left side.
dotsRight
Dots on the right side.
nonInformation
No appropriate icon to display the maneuver.
separator
Separator.
prohibited_0
Traffic prohibited, no highlight.
prohibited_1
Traffic prohibited, highlighted.
publicTransport_0
Public traffic lane, no highlight.
publicTransport_1
Public traffic lane, highlighted.
left_0
Left, no highlight.
left_1
Left, highlighted.
left_Right_0_0
Combined maneuver - left or right, no highlight.
left_Right_0_1
Combined maneuver - left or right, right is highlighted.
left_Right_1_0
Combined maneuver - left or right, left is highlighted.
left_Right_1_1
Combined maneuver - left or right, both are highlighted.
left_SlightlyLeft_0_0
Combined maneuver - left or slightly left, no highlight.
left_SlightlyLeft_0_1
Combined maneuver - left or slightly left, slightly left is highlighted.
left_SlightlyLeft_1_0
Combined maneuver - left or slightly left, left is highlighted.
left_SlightlyLeft_1_1
Combined maneuver - left or slightly left, both are highlighted.
left_SlightlyRight_0_0
Combined maneuver - left or slightly right, no highlight.
left_SlightlyRight_0_1
Combined maneuver - left or slightly right, slightly right is highlighted.
left_SlightlyRight_1_0
Combined maneuver - left or slightly right, right is highlighted.
left_SlightlyRight_1_1
Combined maneuver - left or slightly right, both are highlighted.
left_Forward_0_0
Combined maneuver - left or right, no highlight.
left_Forward_0_1
Combined maneuver - left or straight ahead, straight ahead is highlighted.
left_Forward_1_0
Combined maneuver - left or straight, left is highlighted.
left_Forward_1_1
Combined maneuver - left or straight, both are highlighted.
left_Forward_Right_0_0_0
Combined maneuver - left, straight ahead or right, no highlight.
left_Forward_Right_0_0_1
Combined maneuver - left, straight ahead or right, right is highlighted.
left_Forward_Right_0_1_0
Combined maneuver - left, straight ahead or right, straight ahead is highlighted.
left_Forward_Right_1_0_0
Combined maneuver - left, straight ahead or right, left is highlighted.
left_Forward_Right_1_1_1
Combined maneuver - left, straight ahead or right, all options are highlighted.
rightWithLeftTurn_0
Right with left turn, no highlight.
rightWithLeftTurn_1
Right with left turn, highlighted.
right_0
Right, no highlight.
right_1
Right, highlighted.
right_SharplyRight_0_0
Combined maneuver - right or sharply right, no highlight.
right_SharplyRight_0_1
Combined maneuver - right or sharply right, sharply right is highlighted.
right_SharplyRight_1_0
Combined maneuver - right or sharply right, right is highlighted.
right_SharplyRight_1_1
Combined maneuver - right or shaply right, both are highlighted.
sharplyLeft_0
Shaply left, no highlight.
sharplyLeft_1
Sharply left, highlighted.
sharplyLeft_Left_0_0
Combined maneuver - sharply left or left, no highlight
sharplyLeft_Left_0_1
Combined maneuver - sharply left or left, left is highlighted.
sharplyLeft_Left_1_0
Combined maneuver - sharply left or left, sharply left is highlighted.
sharplyLeft_Left_1_1
Combined maneuver - sharply left or left, both are highlighted.
sharplyLeft_SlightlyLeft_0_0
Combined maneuver - sharply left or slightly left, no highlight.
sharplyLeft_SlightlyLeft_0_1
Combined maneuver - sharply left or slightly left, slightly left is highlighted.
sharplyLeft_SlightlyLeft_1_0
Combined maneuver - sharply left or slightly left, sharply left is highlighted.
sharplyLeft_SlightlyLeft_1_1
Combined maneuver - sharply left or slightly left, both are highlighted.
sharplyLeft_SlightlyRight_0_0
Combined maneuver - sharply left or slightly right, no highlight.
sharplyLeft_SlightlyRight_0_1
Combined maneuver - sharply left or slightly right, slightly right is highlighted.
sharplyLeft_SlightlyRight_1_0
Combined maneuver - sharply left or slightly right, sharply left are highlighted.
sharplyLeft_SlightlyRight_1_1
Combined maneuver - sharply left or slightly right, both are highlighted.
sharplyLeft_Forward_0_0
Combined maneuver - sharply left or straight ahead, no highlight.
sharplyLeft_Forward_0_1
Combined maneuver - sharply left or straight ahead, straight ahead is highlighted.
sharplyLeft_Forward_1_0
Combined maneuver - sharply left or straight ahead, sharply left is highlighted.
sharplyLeft_Forward_1_1
Combined maneuver - sharply left or straight ahead, both are highlighted.
sharplyRight_0
Sharply right, no highlight.
sharplyRight_1
Sharply to the right, highlighted.
slightlyLeft_0
Slightly left, no highlight.
slightlyLeft_1
Slightly left, highlighted.
slightlyLeft_Right_0_0
Combined maneuver - slightly left or right, no highlight.
slightlyLeft_Right_0_1
Combined maneuver - slightly left or right, right is highlighted.
slightlyLeft_Right_1_0
Combined maneuver - slightly left or right, slightly left is highlighted.
slightlyLeft_Right_1_1
Combined maneuver - slightly left or right, both highlighted.
slightlyLeft_SharplyRight_0_0
Combined maneuver - slightly left or sharply right, no highlight.
slightlyLeft_SharplyRight_0_1
Combined maneuver - slightly left or sharply right, sharply right is highlighted.
slightlyLeft_SharplyRight_1_0
Combined maneuver - slightly left or sharply right, slightly left is highlighted.
slightlyLeft_SharplyRight_1_1
Combined maneuver - slightly left or sharply to right, both are highlighted.
slightlyLeft_SlightlyRight_0_0
Combined maneuver - slightly left or slightly right, no highlight.
slightlyLeft_SlightlyRight_0_1
Combined maneuver - slightly left or slightly right, slightly right is highlighted.
slightlyLeft_SlightlyRight_1_0
Combined maneuver - slightly left or slightly right, slightly left is highlighted.
slightlyLeft_SlightlyRight_1_1
Combined maneuver - slightly left or slightly right, both are highlighted.
slightlyLeft_Forward_0_0
Combined maneuver - slightly left or slightly right, no highlight.
slightlyLeft_Forward_0_1
Combined maneuver - slightly left or straight ahead, straight ahead is highlighted.
slightlyLeft_Forward_1_0
Combined maneuver - slightly left or straight ahead, slightly left is highlighted.
slightlyLeft_Forward_1_1
Combined maneuver - slightly left or straight ahead, both are highlighted.
slightlyRight_0
Slightly right, no highlight.
slightlyRight_1
Slightly right, highlighted.
slightlyRight_Right_0_0
Combined maneuver - slightly right or right, no highlight.
slightlyRight_Right_0_1
Combined maneuver - slightly right or right, right is highlighted.
slightlyRight_Right_1_0
Combined maneuver - slightly right or right, slightly right is highlighted.
slightlyRight_Right_1_1
Combined maneuver - slightly right or right, both are highlighted.
slightlyRight_SharplyRight_0_0
Combined maneuver - slightly right or sharply right, no highlight.
slightlyRight_SharplyRight_0_1
Combined maneuver - slightly right or sharply right, sharply right is highlighted.
slightlyRight_SharplyRight_1_0
Combined maneuver - slightly right or sharply right, slightly right is highlighted.
slightlyRight_SharplyRight_1_1
Combined maneuver - slightly right or sharply right, both are highlighted.
forward_0
Straight ahead, no highlight.
forward_1
Straight ahead, highlighted.
forward_RightWithLeftTurn_0_0
Combined maneuver - straight ahead or right with left turn, no highlight.
forward_RightWithLeftTurn_0_1
Combined maneuver - straight ahead or right with left turn, right with left turn is highlighted.
forward_RightWithLeftTurn_1_0
Combined maneuver - straight ahead or right with left turn, straight ahead is highlighted.
forward_RightWithLeftTurn_1_1
Combined maneuver - straight ahead or right with left turn, both are highlighted.
forward_Right_0_0
Combined maneuver - straight ahead or right, no highlight.
forward_Right_0_1
Combined maneuver - straight ahead or right, right is highlighted.
forward_Right_1_0
Combined maneuver - straight ahead or right, straight ahead is highlighted.
forward_Right_1_1
Combined maneuver - straight ahead or right, both are highlighted.
forward_SharplyRight_0_0
Combined maneuver - straight ahead or sharply right, no highlight.
forward_SharplyRight_0_1
Combined maneuver - straight ahead or sharply right, sharply right is highlighted.
forward_SharplyRight_1_0
Combined maneuver - straight ahead or sharply right, straight ahead is highlighted.
forward_SharplyRight_1_1
Combined maneuver - straight ahead or sharply right, both are highlighted.
forward_SlightlyRight_0_0
Combined maneuver - straight ahead or slightly right, no highlight.
forward_SlightlyRight_0_1
Combined maneuver - straight ahead or slightly right, slightly right is highlighted.
forward_SlightlyRight_1_0
Combined maneuver - straight ahead or slightly right, slightly right is highlighted.
forward_SlightlyRight_1_1
Combined maneuver - straight ahead or slightly right, both are highlighted.
turnover_0
U-turn, no highlight.
turnover_1
U-turn, highlighted.
LogLevel
MapAppearance
`default`
Uses default theme.
universal
Uses a single current style theme in any environment.
automatic
Uses an automatically switched light and dark theme. The automatic switching is done according to the environment change: see UITraitEnvironment and UIView.traitCollection. Available for iOS versions 13 or higher. For iOS 12, the default theme is used.
var description
Textual representation of this instance.
var defaultBackgroundColor
Default backgroud color depending of the system theme.
MapDataLoadingState
MapRotationDirection
MapScalingDirection
MapShiftDirection
MapVisibilityState
MyLocationMapObjectMarkerType
NavigationViewMapControlsBehaviour
NavigatorFollowDriverType
NavigatorFollowMode
ObjectType
admDiv
Administrative unit.
admDivCity
City.
admDivCountry
Country/state.
admDivDistrict
District (of a city).
admDivDistrictArea
Region or province district.
admDivDivision
Division.
admDivLivingArea
Living area.
admDivPlace
Miscellaneous polygon objects: parks, beaches, recreation facilities, lakes, and other places.
admDivRegion
Region/province.
admDivSettlement
Settlement (village).
attraction
Sightseeing attraction.
branch
Branch of an organization.
building
Building.
coordinates
Global coordinates.
crossroad
Intersection.
gate
Gate/passage.
kilometerRoadSign
Kilometer marker.
parking
Parking.
road
Road.
route
Public transportation route.
station
Stop.
stationEntrance
Station entrance.
stationMetro
Metro station.
stationPlatform
Station platform.
street
Street.
unknown
In case of an unexpected type.
Obstacle
ObstaclePassLimitation
PackageInfoError
PackageUpdateStatus
ParkingAccess
ParkingPavingType
ParkingPurpose
ParkingType
PedestrianInstructionCrossroadLandmark
PedestrianInstructionCrossroadManeuverDirection
PedestrianInstructionIndoorFloorChangeType
PersonalDataCollectionConsent
PointGeometryData
PublicTransportType
bus
trolleybus
Trolleybus.
tram
Tram.
shuttleBus
Shuttle bus.
metro
Subway.
suburbanTrain
Suburban train.
funicularRailway
Funicular.
monorail
Monorail.
waterwayTransport
Water transport.
cableCar
Cable car.
speedTram
High-speed tram.
premetro
Underground tram.
lightMetro
Light metro.
aeroexpress
Aeroexpress.
moscowCentralRing
Moscow Central Ring.
moscowCentralDiameters
Moscow Central Diameters.
Range
RasterUrlTemplate
RoadEventActionState
RoadEventActionType
RoadEventDisplayCategory
RoadEventType
RoadRule
RoadSubtype
none
No additional description to the road type.
archway
Arch.
bridge
Bridge.
crosswalk
Pedestrian crossing.
footbridge
Pedestrian bridge.
ford
Ford.
indoor
Room.
overgroundCrossing
Overpass.
parkFootpath
Park path.
parkPath
Parkway.
residentialArea
Residential area.
stairwayUp
Stairway going upwards.
stairwayDown
Stairway going downwards.
subwayCrossing
Subway crossing.
tunnel
Tunnel.
underpass
Underpass.
RoadSurface
RoadType
unknown
Unknown.
walkway
Pedestrian path or a section of road where pedestrian traffic is allowed.
bikeway
Bicycle lane or section of road where bicycles are permitted.
pathway
Roadway of minimal importance.
fieldForestRoad
Field or forest road.
serviceRoad
Access road/intra-block driveway.
otherStreetRoad
Road that passes through other streets of a settlement.
mainStreetRoad
Roadway running through the main streets of a settlement.
highway
Highway.
intercityRoad
'Intercity highway'.
federalRoad
Road of federal importance.
RouteCameraDirection
RouteCameraPurpose
speedControl
Recording of exceeding the speed limit.
trafficLightsControl
Recording of passing at the forbidden signal of traffic lights.
stopLineControl
Recording of driving over the stop line, driving without stopping the stop sign, driving to the intersection during a jam.
publicTransportLaneControl
Recording of movement on the dedicated lane for public transport.
oncomingTrafficLaneControl
Recording driving in the oncoming lane.
pedestrianAdvantageControl
Recording of failure to give preference to pedestrians.
laneDisciplineControl
Recording of violation of lane rotation at the intersection.
roadMarkingsCrossingControl
Recording of crossing the solid line of road markings, driving on the side of the road.
averageSpeedControl
Recording of exceeding the average speed on the section.
noStoppingControl
Recording of violation of prohibition of stopping.
dummy
Fake item.
platon
“Platon” system camera: https://platon.ru/en/about/
RouteExitSignTableColor
RouteExitSignType
RouteLaneManeuver
RouteMapObjectCalloutLabelDisplayMode
absoluteValues
Travel time and/or route length are displayed in absolute values (e.g. N km, M min).
relativeToActiveRouteValues
Travel time and/or route length are displayed in absolute values only for the active route. For inactive routes, the difference from the corresponding value of the active route is displayed (e.g. +/-N km, +/-M min). If there is no active route or if there is more than one active route on the map, the travel time and/or route length are displayed in absolute values for all routes.
RouteMapObjectCalloutLabelFlag
RouteMapObjectDisplayFlag
routeParts
Route segments.
startPoint
Starting point of the route.
finishPoint
Finish point of the route.
intermediatePoints
Intermediate waypoints.
transportConnectionPoints
Connection points of route segments (except for routes on public transport). For example, a point at the junction point of a pedestrian and automobile segment.
maneuvers
Maneuvers.
cameras
Cameras.
humps
Artificial bumps.
barriers
Road closures.
gates
Gates, barriers.
stairways
Stairs.
publicTransportPlatforms
Public transport stops.
accidents
Traffic accident.
roadWorks
Road works.
comments
Comments.
roadRestrictions
Traffic closures.
otherEvents
Other" events.
tollRoads
Start and end of toll road.
lanesBubbles
Lane bubbles (displayed only in source with navigation mode).
bubbles
Lane bubbles with travel time and route length.
indoorInstructions
Instructions in buildings. Move by elevator, escalator, etc.
inactiveFloors
Shows parts of the route inside buildings not just for the active floor.
trafficLights
Highlight traffic lights on the route.
immersiveRouteParts
Use immersive geometry for route parts (used together with RouteParts).
RouteMapObjectPassedDistanceVisualization
RouteMapObjectPermanentDisplayFlag
RoutePointKind
start
Starting point of the route.
finish
Finish point of the route.
intermediate
Intermediate point of the route.
camera
Camera.
accident
Traffic accident.
roadWork
Road works.
comment
Comment.
roadRestriction
Traffic closure.
otherEvent
Other event.
tollRoad
Start and end of toll road.
transportConnectionPoint
Point of connection of route segments (except public transport routes). For example, the point at the connection of a pedestrian and car segment.
hump
Speed bump.
gate
Gate or barrier.
barrier
Road closure.
stairway
Stairs.
indoorInstruction
Instructions in a building. Moving by elevator, escalator, etc.
badRoad
Bad road.
publicTransportPlatform
Public transport platform.
ground
Beginning and end of a dirt road.
gravel
Beginning and end of gravel coverage.
carRoad
Beginning and end of the motorized section of road (for bicycle/scooter routes).
bicycleRoad
Beginning and end of a bicycle track.
bicycleLane
Beginning and end of a cycle lane.
trafficLight
Traffic lights.
RouterType
RouteSearchOptions
RouteSearchType
RouteVisualizationType
ScooterInstructionCrossroadLandmark
ScooterInstructionCrossroadManeuverDirection
SearchResultType
Settlement
SimulationSpeedMode
SortingType
SoundCategory
crossroadCameras
Intersection control cameras.
laneCameras
Cameras recording traffic in the dedicated lane for public transport.
noStoppingControlCameras
Stop control cameras.
roadMarkingCameras
Traffic lane cameras.
averageSpeedCameras
Average speed cameras.
maxSpeedCameras
Instant speed cameras.
accidents
Accidents.
roadWorks
Road works.
tolls
Toll roads.
exceedSpeedLimits
Violations of maximum permitted speed.
intermediatePoints
Intermediate points on the route.
routeRebuild
Route is rebuilt.
instructions
Instructions (maneuvers) on route.
obstacles
Obstacles.
roadSubtypes
Road subtypes.
lostLocation
Lost GPS signal.
routeEnd
Route completion.
SpecialSpaceType
SpeedFormattingStrategy
State
SuggestedType
admDivCity
City.
admDivCountry
Country/state.
admDivDistrict
District (of a city).
admDivDistrictArea
Region or province district.
admDivDivision
Division.
admDivLivingArea
Living area.
admDivPlace
Miscellaneous polygon objects: parks, beaches, recreation facilities, lakes, and other places.
admDivRegion
Region/province.
admDivSettlement
Settlement (village).
attraction
Sightseeing attraction.
attribute
Additional attribute.
branch
Branch of an organization.
building
Building.
coordinates
Global coordinates.
crossroad
Intersection.
kilometerRoadSign
Kilometer marker.
marketAttribute
Names of goods.
marketBrand
Goods brand.
marketCategory
Category of goods. Requires market.suggestor_category.
marketSuggestorCategory
Required to expand the goods categories.
metaRubric
Metacategory.
org
Organization.
parking
Parking.
road
Road.
route
Public transportation route.
routeType
Route type.
rubric
Category.
station
Stop.
stationEntrance
Station entrance.
stationMetro
Metro station.
street
Street.
text
Text hint.
unknown
In case of an unexpected type.
SuggestHandler
SuggestorType
address
Address suggestor.
citySelector
Settlement suggestor. Can be used without specifying a project.
object
Directory object (categories, branches, streets, cities, etc.) suggestor.
places
Place suggestor.
routeEndpoint
A tooltip for selecting waypoints. Optimized for searching for point objects in a single action. Rejects objects without points.
rubric
Category suggestor.
TextPlacement
noLabel
No caption.
bottomCenter
At the center of the area below the square around the marker.
bottomRight
On the right side of the area below the square around the marker.
bottomLeft
On the left side of the area below the square around the marker.
circleBottomRight
At the bottom right of the area relative to the circle around the marker.
rightBottom
Bottom of the area to the right of the square around the marker.
rightCenter
At the center of the area to the right of the square around the marker.
rightTop
Above the area to the right of the square around the marker.
circleTopRight
Top right area relative to the circle around the marker.
topCenter
At the center of the area above the square around the marker.
topRight
Right side of the area above the square around the marker.
topLeft
Left side of the area above the square around the marker.
circleTopLeft
Top left of area relative to the circle around the marker.
leftTop
Above the area to the left of the square around the marker.
leftCenter
At the center of the area to the left of the square around the marker.
leftBottom
Bottom of area to the left of the square around the marker.
circleBottomLeft
Bottom left area relative to the circle around the marker.
centerCenter
Center of the square around the marker.
ThermometerEventsPosition
TimeFormattingStrategy
TrafficControlStatus
hidden
Control is hidden. Appears when there is no traffic information in the region.
enabled
Control is active. Appears when the data on traffic jams is up to date, and there is a layer of traffic jams on the map.
disabled
Control in inactive state. Appears when there is no traffic jams layer on the map.
loading
Load indicator. Appears when the data on traffic jams in the inactive state, and there is a layer of traffic jams on the map.
TrafficScoreState
TrafficSpeedColor
TransportType
VendorConfig
WeekDay
public static func < (lhs: WeekDay, rhs: WeekDay) -> Bool
Returns a Boolean value indicating whether the value of the first argument is less than that of the second argument.